Move it from exynos5250-cros-common.dtsi to exynos5250-snow.dts. Spring does not need it, it uses an Atmel maXTouch instead. Signed-off-by: Andreas Färber <afaerber@xxxxxxx> --- v2: New (Doug Anderson) arch/arm/boot/dts/exynos5250-cros-common.dtsi | 8 -------- arch/arm/boot/dts/exynos5250-snow.dts | 10 ++++++++++ 2 files changed, 10 insertions(+), 8 deletions(-) diff --git a/arch/arm/boot/dts/exynos5250-cros-common.dtsi b/arch/arm/boot/dts/exynos5250-cros-common.dtsi index 61128d1..e603e9c 100644 --- a/arch/arm/boot/dts/exynos5250-cros-common.dtsi +++ b/arch/arm/boot/dts/exynos5250-cros-common.dtsi @@ -39,14 +39,6 @@ status = "okay"; samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <378000>; - - trackpad { - reg = <0x67>; - compatible = "cypress,cyapa"; - interrupts = <2 0>; - interrupt-parent = <&gpx1>; - wakeup-source; - }; }; i2c@12C80000 { diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts index 0f867a3..f2b8c41 100644 --- a/arch/arm/boot/dts/exynos5250-snow.dts +++ b/arch/arm/boot/dts/exynos5250-snow.dts @@ -490,6 +490,16 @@ }; }; +&i2c_1 { + trackpad { + reg = <0x67>; + compatible = "cypress,cyapa"; + interrupts = <2 0>; + interrupt-parent = <&gpx1>; + wakeup-source; + }; +}; + &pinctrl_0 { max77686_irq: max77686-irq { samsung,pins = "gpx3-2"; -- 1.9.3 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html