> -----Original Message----- > From: Rob Herring <robh@xxxxxxxxxx> > Sent: Tuesday 1 June 2021 9:24 PM > To: Anand Ashok Dumbre <ANANDASH@xxxxxxxxxx> > Cc: jic23@xxxxxxxxxx; lars@xxxxxxxxxx; linux-iio@xxxxxxxxxxxxxxx; git-dev > <git-dev@xxxxxxxxxx>; Michal Simek <michals@xxxxxxxxxx>; > pmeerw@xxxxxxxxxx; devicetree@xxxxxxxxxxxxxxx; linux- > kernel@xxxxxxxxxxxxxxx > Subject: Re: [PATCH v5 3/4] dt-bindings: iio: adc: Add Xilinx AMS binding > documentation > > On Fri, May 28, 2021 at 06:29:58PM +0100, Anand Ashok Dumbre wrote: > > Xilinx AMS have several ADC channels that can be used for measurement > > of different voltages and temperatures. Document the same in the > bindings. > > > > Signed-off-by: Anand Ashok Dumbre <anand.ashok.dumbre@xxxxxxxxxx> > > --- > > .../bindings/iio/adc/xlnx,zynqmp-ams.yaml | 265 ++++++++++++++++++ > > 1 file changed, 265 insertions(+) > > create mode 100644 > > Documentation/devicetree/bindings/iio/adc/xlnx,zynqmp-ams.yaml > > > > diff --git > > a/Documentation/devicetree/bindings/iio/adc/xlnx,zynqmp-ams.yaml > > b/Documentation/devicetree/bindings/iio/adc/xlnx,zynqmp-ams.yaml > > new file mode 100644 > > index 000000000000..df3cfca69e2d > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/iio/adc/xlnx,zynqmp-ams.yaml > > @@ -0,0 +1,265 @@ > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 > > +--- > > +$id: http://devicetree.org/schemas/iio/adc/xlnx,zynqmp-ams.yaml# > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > + > > +title: Xilinx Zynq Ultrascale AMS controller > > + > > +maintainers: > > + - Anand Ashok Dumbre <anand.ashok.dumbre@xxxxxxxxxx> > > + > > +description: | > > + The AMS (Analog Monitoring System) includes an ADC as well as > > +on-chip sensors > > + that can be used to sample external voltages and monitor on-die > > +operating > > + conditions, such as temperature and supply voltage levels. > > + The AMS has two SYSMON blocks which are PL (Programmable Logic) > > +SYSMON and > > + PS (Processing System) SYSMON. > > + All designs should have AMS registers, but PS and PL are optional. > > +The > > + AMS controller can work with only PS, only PL and both PS and PL > > + configurations. Please specify registers according to your design. > > +Devicetree > > + should always have AMS module property. Providing PS & PL module is > optional. > > + > > + AMS Channel Details > > + ``````````````````` > > + Sysmon Block |Channel| Details > |Measurement > > + |Number | > |Type > > Use spaces rather than tabs Will amend in the next series. > > > + ----------------------------------------------------------------------------------------- > ---------------- > > + AMS CTRL |0 |System PLLs voltage measurement, VCC_PSPLL. > |Voltage > > + |1 |Battery voltage measurement, VCC_PSBATT. > |Voltage > > + |2 |PL Internal voltage measurement, VCCINT. > |Voltage > > + |3 |Block RAM voltage measurement, VCCBRAM. > |Voltage > > + |4 |PL Aux voltage measurement, VCCAUX. > |Voltage > > + |5 |Voltage measurement for six DDR I/O PLLs, > VCC_PSDDR_PLL. |Voltage > > + |6 |VCC_PSINTFP_DDR voltage measurement. > |Voltage > > + ----------------------------------------------------------------------------------------- > ---------------- > > + PS Sysmon |7 |LPD temperature measurement. > |Temperature > > + |8 |FPD temperature measurement (REMOTE). > |Temperature > > + |9 |VCC PS LPD voltage measurement (supply1). > |Voltage > > + |10 |VCC PS FPD voltage measurement (supply2). > |Voltage > > + |11 |PS Aux voltage reference (supply3). > |Voltage > > + |12 |DDR I/O VCC voltage measurement. > |Voltage > > + |13 |PS IO Bank 503 voltage measurement (supply5). > |Voltage > > + |14 |PS IO Bank 500 voltage measurement (supply6). > |Voltage > > + |15 |VCCO_PSIO1 voltage measurement. > |Voltage > > + |16 |VCCO_PSIO2 voltage measurement. > |Voltage > > + |17 |VCC_PS_GTR voltage measurement > (VPS_MGTRAVCC). |Voltage > > + |18 |VTT_PS_GTR voltage measurement > (VPS_MGTRAVTT). |Voltage > > + |19 |VCC_PSADC voltage measurement. > |Voltage > > + ----------------------------------------------------------------------------------------- > ---------------- > > + PL Sysmon |20 |PL temperature measurement. > |Temperature > > + |21 |PL Internal voltage measurement, VCCINT. > |Voltage > > + |22 |PL Auxiliary voltage measurement, VCCAUX. > |Voltage > > + |23 |ADC Reference P+ voltage measurement. > |Voltage > > + |24 |ADC Reference N- voltage measurement. > |Voltage > > + |25 |PL Block RAM voltage measurement, VCCBRAM. > |Voltage > > + |26 |LPD Internal voltage measurement, VCC_PSINTLP > (supply4). |Voltage > > + |27 |FPD Internal voltage measurement, VCC_PSINTFP > (supply5). |Voltage > > + |28 |PS Auxiliary voltage measurement (supply6). > |Voltage > > + |29 |PL VCCADC voltage measurement (vccams). > |Voltage > > + |30 |Differential analog input signal voltage measurment. > |Voltage > > + |31 |VUser0 voltage measurement (supply7). > |Voltage > > + |32 |VUser1 voltage measurement (supply8). > |Voltage > > + |33 |VUser2 voltage measurement (supply9). > |Voltage > > + |34 |VUser3 voltage measurement (supply10). > |Voltage > > + |35 |Auxiliary ch 0 voltage measurement (VAux0). > |Voltage > > + |36 |Auxiliary ch 1 voltage measurement (VAux1). > |Voltage > > + |37 |Auxiliary ch 2 voltage measurement (VAux2). > |Voltage > > + |38 |Auxiliary ch 3 voltage measurement (VAux3). > |Voltage > > + |39 |Auxiliary ch 4 voltage measurement (VAux4). > |Voltage > > + |40 |Auxiliary ch 5 voltage measurement (VAux5). > |Voltage > > + |41 |Auxiliary ch 6 voltage measurement (VAux6). > |Voltage > > + |42 |Auxiliary ch 7 voltage measurement (VAux7). > |Voltage > > + |43 |Auxiliary ch 8 voltage measurement (VAux8). > |Voltage > > + |44 |Auxiliary ch 9 voltage measurement (VAux9). > |Voltage > > + |45 |Auxiliary ch 10 voltage measurement (VAux10). > |Voltage > > + |46 |Auxiliary ch 11 voltage measurement (VAux11). > |Voltage > > + |47 |Auxiliary ch 12 voltage measurement (VAux12). > |Voltage > > + |48 |Auxiliary ch 13 voltage measurement (VAux13). > |Voltage > > + |49 |Auxiliary ch 14 voltage measurement (VAux14). > |Voltage > > + |50 |Auxiliary ch 15 voltage measurement (VAux15). > |Voltage > > + > > + -------------------------------------------------------------------- > > + ------------------------------------ > > + > > +properties: > > + compatible: > > + enum: > > + - xlnx,zynqmp-ams > > + > > + interrupts: > > + description: IRQ line for AMS > > Drop. > > > + maxItems: 1 > > + > > + interrupt-names: > > + items: > > + - const: ams-irq > > Kind of a pointless name. You don't need *-names unless you have more > than one. > Agreed, will drop > > + > > + reg: > > + description: AMS Controller register space > > + maxItems: 1 > > + > > + reg-names: > > + items: > > + - const: ams-base > > + > > + ranges: > > + description: > > + Keep the property empty to map child address space > > + (for PS and/or PL) nodes 1:1 onto the parent address space. > > + maxItems: 1 > > This contradicts 'empty'. > Accepted. > > + > > + '#address-cells': > > + const: 1 > > + > > + '#size-cells': > > + const: 1 > > + > > + '#io-channel-cells': > > + const: 1 > > + > > +patternProperties: > > + "^ams-ps@0,0$": > > If you have a non standard unit-address, you need to define the fields. Will do. > > > + type: object > > + description: | > > + PS (Processing System) SYSMON is memory mapped to PS. This block > has > > + built-in alarm generation logic that is used to interrupt the processor > > + based on condition set. > > + > > + properties: > > + compatible: > > + enum: > > + - xlnx,zynqmp-ams-ps > > + > > + reg: > > + description: Register Space for PS-SYSMON > > + maxItems: 1 > > + > > + required: > > + - compatible > > + - reg > > + > > + additionalProperties: false > > + > > + "^ams-pl@1,0$": > > What does the '1' correspond to? I have updated this in other places, but this got left out. 1 is supposed to be 400 which is the offset at which this node. > > > + type: object > > + description: > > + PL-SYSMON is capable of monitoring off chip voltage and temperature. > > + PL-SYSMON block has DRP, JTAG and I2C interface to enable > monitoring > > + from external master. Out of this interface currently only DRP is > > + supported. This block has alarm generation logic that is used to > > + interrupt the processor based on condition set. > > + > > + properties: > > + compatible: > > + items: > > + - enum: > > + - xlnx,zynqmp-ams-pl > > + > > + reg: > > + description: Register Space for PL-SYSMON. > > + maxItems: 1 > > + > > + required: > > + - compatible > > + - reg > > + > > + additionalProperties: false > > + > > + patternProperties: > > + "^xlnx,ext-channels$": > > Not a pattern. Put under 'properties'. > > > + > > + type: object > > + > > + description: > > + List of external channels that are connected to the AMS PL module. > > + If this property is not present, no external channels will be > > + assumed to be connected. > > + > > + properties: > > + '#address-cells': > > + const: 1 > > + > > + '#size-cells': > > + const: 0 > > + > > + additionalProperties: false > > + > > + patternProperties: > > + "^channel@([0-9]{1,2}|1[0-5][0-9])$": > > + type: object > > + description: > > + Describes the external channels connected. > > + > > + properties: > > + reg: > > + $ref: /schemas/types.yaml#/definitions/uint32 > > 'reg' already has a type. Will remove it. > > > + description: > > + Pair of pins the channel is connected to. This value is > > + same as Channel Number for a particular channel. > > + minimum: 20 > > + maximum: 50 > > Based on the unit-address, the max is 159. Will fix it. > > > + > > + xlnx,bipolar: > > + $ref: /schemas/types.yaml#/definitions/flag > > + type: boolean > > + description: > > + If the set channel is used in bipolar mode. > > + > > + required: > > + - reg > > + > > + additionalProperties: false > > + > > +required: > > + - compatible > > + - interrupts > > + - interrupt-names > > + - reg > > + - reg-names > > + - ranges > > + > > +additionalProperties: false > > + > > +examples: > > + - | > > + bus { > > + #address-cells = <2>; > > + #size-cells = <2>; > > + > > + xilinx_ams: ams@ffa50000 { > > + compatible = "xlnx,zynqmp-ams"; > > + interrupt-parent = <&gic>; > > + interrupts = <0 56 4>; > > + interrupt-names = "ams-irq"; > > + reg = <0x0 0xffa50000 0x0 0x800>; > > + reg-names = "ams-base"; > > + #address-cells = <1>; > > + #size-cells = <1>; > > + #io-channel-cells = <1>; > > + ranges = <0 0 0xffa50800 0x800>; > > + > > + ams_ps: ams-ps@0,0 { > > + compatible = "xlnx,zynqmp-ams-ps"; > > + reg = <0 0x400>; > > + }; > > + > > + ams_pl: ams-pl@1,0 { > > + compatible = "xlnx,zynqmp-ams-pl"; > > + reg = <0x400 0x400>; > > + xlnx,ext-channels { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + channel@30 { > > + reg = <30>; > > + xlnx,bipolar; > > + }; > > + channel@31 { > > + reg = <31>; > > + }; > > + channel@38 { > > + reg = <38>; > > + xlnx,bipolar; > > + }; > > + }; > > + }; > > + }; > > + }; > > -- > > 2.17.1 Thanks, Anand
