Tejun, Kishon, Sebastian,
I looked into the AHCI framework to see how to map PHYs and ports
information. I see two ways of doing this:
- We can attach the ahci_port_priv to the ahci_host_priv structure,
but that would require quite a lot of changes since the
ahci_port_priv is initialized at the very end (in port_start()) and
because ahci_port_priv is currently retrieved from the ata_port
structure in libahci functions. We do want to parse the dt ports
early in the AHCI initialization to be able to generate the right
port_map mask. Tests would be needed to ensure nothing is broken.
- We can move the PHY handling to where the ports are handled, moving
PHYs from ahci_host_priv to ahci_port_priv. This also would require
to perform some tests as PHY operations would be moved from
libahci_platform to libahci.
In both cases we do not have time to do this for the next release, as
the request popped up quite late.
So as of now:
- Either the series is merged as is and changes to the AHCI framework
can be made for 3.18, as it's not particularly linked to this
series.
- Or you really do not want it. Then that would be great if patches
1-2 and 7-8 could be merged so that we do not end up with this big
series going for yet another cycle... I think Kishon already took
patches 1-2.
I've done the required modifications so that port_map is not used
anymore as a mask during the initialization (patch 3).
Thanks,
Antoine
Changes since v9:
- moved port_map parameters into the AHCI structure
Changes since v8:
- stopped reset the controller from the PHY driver
- removed fixed array sizes
- got rid of the custom to_berlin_sata_phy_priv() macro
- added dependency to HAS_IOMEM
Changes since v7:
- got back to the each PHY as a sub-node representation
- renamed the power bit in the PHY driver
Changes since v6:
- added the 'clocks' property and support in the PHY driver
- updated the PHY compatible
Changes since v5:
- rebased on top of v3.16-rc1
- added the 'clocks' property in the sata node
Changes since v4:
- updated PHY driver as tristate
- handled the case were no SATA port is enabled
- updated the compatible to a generic one
- cosmetic fixups
Changes since v3:
- moved all PHY operations to the PHY driver
- removed PHY sub-nodes
- removed the custom Berlin AHCI driver and switched to
ahci_platform
- added multiple PHYs support to the libahci_platform
Changes since v2:
- modeled each PHY as a sub-node
- cosmetic fixups
Changes since v1:
- added a PHY driver, allowing to enable each port
individually and removed the 'force-port-map' property
- made the drivers a bit less magic :)
- wrote a function to select and configure registers in the
AHCI driver
- removed BG2 / BG2CD nodes
Antoine Ténart (8):
phy: add a driver for the Berlin SATA PHY
Documentation: bindings: add the Berlin SATA PHY
ata: libahci_platform: move port_map parameters into the AHCI
structure
ata: libahci: allow to use multiple PHYs
ata: ahci_platform: add a generic AHCI compatible
Documentation: bindings: document the sub-nodes AHCI bindings
ARM: berlin: add the AHCI node for the BG2Q
ARM: berlin: enable the eSATA interface on the BG2Q DMP
.../devicetree/bindings/ata/ahci-platform.txt | 37 +++
.../devicetree/bindings/phy/berlin-sata-phy.txt | 34 +++
arch/arm/boot/dts/berlin2q-marvell-dmp.dts | 8 +
arch/arm/boot/dts/berlin2q.dtsi | 39 +++
drivers/ata/ahci.h | 9 +-
drivers/ata/ahci_da850.c | 3 +-
drivers/ata/ahci_imx.c | 3 +-
drivers/ata/ahci_mvebu.c | 3 +-
drivers/ata/ahci_platform.c | 5 +-
drivers/ata/ahci_st.c | 2 +-
drivers/ata/ahci_sunxi.c | 2 +-
drivers/ata/ahci_xgene.c | 2 +-
drivers/ata/libahci.c | 17 +-
drivers/ata/libahci_platform.c | 187 ++++++++++----
drivers/phy/Kconfig | 7 +
drivers/phy/Makefile | 1 +
drivers/phy/phy-berlin-sata.c | 284 +++++++++++++++++++++
include/linux/ahci_platform.h | 4 +-
18 files changed, 574 insertions(+), 73 deletions(-)
create mode 100644 Documentation/devicetree/bindings/phy/berlin-sata-phy.txt
create mode 100644 drivers/phy/phy-berlin-sata.c
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
