Re: [v1 2/3] drm/msm/dsi: Add PHY configuration for SC7280

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 31/05/2021 16:33, Rajeev Nandan wrote:
The SC7280 SoC uses the 7nm (V4.1) DSI PHY driver with
different enable|disable regulator loads.

Signed-off-by: Rajeev Nandan <rajeevny@xxxxxxxxxxxxxx>
---
  drivers/gpu/drm/msm/Kconfig               |  6 +++---
  drivers/gpu/drm/msm/dsi/phy/dsi_phy.c     |  2 ++
  drivers/gpu/drm/msm/dsi/phy/dsi_phy.h     |  1 +
  drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c | 22 ++++++++++++++++++++++
  4 files changed, 28 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/msm/Kconfig b/drivers/gpu/drm/msm/Kconfig
index 10f693e..7c9d9f1 100644
--- a/drivers/gpu/drm/msm/Kconfig
+++ b/drivers/gpu/drm/msm/Kconfig
@@ -114,9 +114,9 @@ config DRM_MSM_DSI_10NM_PHY
  	  Choose this option if DSI PHY on SDM845 is used on the platform.
config DRM_MSM_DSI_7NM_PHY
-	bool "Enable DSI 7nm PHY driver in MSM DRM (used by SM8150/SM8250)"
+	bool "Enable DSI 7nm PHY driver in MSM DRM"
  	depends on DRM_MSM_DSI
  	default y
  	help
-	  Choose this option if DSI PHY on SM8150/SM8250 is used on the
-	  platform.
+	  Choose this option if DSI PHY on SM8150/SM8250/SC7280 is used on
+	  the platform.
diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c
index ff7f2ec..2770783 100644
--- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c
@@ -593,6 +593,8 @@ static const struct of_device_id dsi_phy_dt_match[] = {
  	  .data = &dsi_phy_7nm_cfgs },
  	{ .compatible = "qcom,dsi-phy-7nm-8150",
  	  .data = &dsi_phy_7nm_8150_cfgs },
+	{ .compatible = "qcom,dsi-phy-7nm-7280",
+	  .data = &dsi_phy_7nm_7280_cfgs },
  #endif
  	{}
  };
diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h
index 94a77ac..bc91dc8 100644
--- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h
@@ -51,6 +51,7 @@ extern const struct msm_dsi_phy_cfg dsi_phy_10nm_cfgs;
  extern const struct msm_dsi_phy_cfg dsi_phy_10nm_8998_cfgs;
  extern const struct msm_dsi_phy_cfg dsi_phy_7nm_cfgs;
  extern const struct msm_dsi_phy_cfg dsi_phy_7nm_8150_cfgs;
+extern const struct msm_dsi_phy_cfg dsi_phy_7nm_7280_cfgs;
struct msm_dsi_dphy_timing {
  	u32 clk_zero;
diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c
index e76ce40..6e30d21 100644
--- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c
@@ -998,3 +998,25 @@ const struct msm_dsi_phy_cfg dsi_phy_7nm_8150_cfgs = {
  	.io_start = { 0xae94400, 0xae96400 },
  	.num_dsi_phy = 2,
  };
+
+const struct msm_dsi_phy_cfg dsi_phy_7nm_7280_cfgs = {
+	.has_phy_lane = true,
+	.reg_cfg = {
+		.num = 1,
+		.regs = {
+			{"vdds", 37550, 0},
+		},
+	},
+	.ops = {
+		.enable = dsi_7nm_phy_enable,
+		.disable = dsi_7nm_phy_disable,
+		.pll_init = dsi_pll_7nm_init,
+		.save_pll_state = dsi_7nm_pll_save_state,
+		.restore_pll_state = dsi_7nm_pll_restore_state,
+	},
+	.min_pll_rate = 600000000UL,
+	.max_pll_rate = (5000000000ULL < ULONG_MAX) ? 5000000000ULL : ULONG_MAX,

Could you please follow the patch by Arnd here? https://lore.kernel.org/linux-arm-msm/20210514213032.575161-1-arnd@xxxxxxxxxx/



+	.io_start = { 0xae94400, 0xae96400 },
+	.num_dsi_phy = 2,

Judging from the next patch, you have one DSI host and one DSI PHY. Could you please correct io_start / num_dsi_phy here?

+	.quirks = DSI_PHY_7NM_QUIRK_V4_1,
+};


With these two issues fixed:

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>


--
With best wishes
Dmitry



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux