On Thu 20 May 12:30 CDT 2021, Jonathan McDowell wrote:
> Signed-off-by: Jonathan McDowell <noodles@xxxxxxxx>
> ---
> arch/arm/boot/dts/qcom-ipq8064.dtsi | 88 +++++++++++++++++++++++++++++
> 1 file changed, 88 insertions(+)
>
> diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi
> index 9628092217cb..c66859abdfd5 100644
> --- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
> +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
> @@ -1026,6 +1026,94 @@
> status = "disabled";
> };
>
> + hs_phy_0: hs_phy_0 {
The node name should be some generic-thing@unit-address, so I fixed up
all your phys as "phy@100f8800" while applying your patches.
Thank you,
Bjorn
> + compatible = "qcom,ipq806x-usb-phy-hs";
> + reg = <0x100f8800 0x30>;
> + clocks = <&gcc USB30_0_UTMI_CLK>;
> + clock-names = "ref";
> + #phy-cells = <0>;
> +
> + status = "disabled";
> + };
> +
> + ss_phy_0: ss_phy_0 {
> + compatible = "qcom,ipq806x-usb-phy-ss";
> + reg = <0x100f8830 0x30>;
> + clocks = <&gcc USB30_0_MASTER_CLK>;
> + clock-names = "ref";
> + #phy-cells = <0>;
> +
> + status = "disabled";
> + };
> +
> + usb3_0: usb3@100f8800 {
> + compatible = "qcom,dwc3", "syscon";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + reg = <0x100f8800 0x8000>;
> + clocks = <&gcc USB30_0_MASTER_CLK>;
> + clock-names = "core";
> +
> + ranges;
> +
> + resets = <&gcc USB30_0_MASTER_RESET>;
> + reset-names = "master";
> +
> + status = "disabled";
> +
> + dwc3_0: dwc3@10000000 {
> + compatible = "snps,dwc3";
> + reg = <0x10000000 0xcd00>;
> + interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
> + phys = <&hs_phy_0>, <&ss_phy_0>;
> + phy-names = "usb2-phy", "usb3-phy";
> + dr_mode = "host";
> + snps,dis_u3_susphy_quirk;
> + };
> + };
> +
> + hs_phy_1: hs_phy_1 {
> + compatible = "qcom,ipq806x-usb-phy-hs";
> + reg = <0x110f8800 0x30>;
> + clocks = <&gcc USB30_1_UTMI_CLK>;
> + clock-names = "ref";
> + #phy-cells = <0>;
> + };
> +
> + ss_phy_1: ss_phy_1 {
> + compatible = "qcom,ipq806x-usb-phy-ss";
> + reg = <0x110f8830 0x30>;
> + clocks = <&gcc USB30_1_MASTER_CLK>;
> + clock-names = "ref";
> + #phy-cells = <0>;
> + };
> +
> + usb3_1: usb3@110f8800 {
> + compatible = "qcom,dwc3", "syscon";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + reg = <0x110f8800 0x8000>;
> + clocks = <&gcc USB30_1_MASTER_CLK>;
> + clock-names = "core";
> +
> + ranges;
> +
> + resets = <&gcc USB30_1_MASTER_RESET>;
> + reset-names = "master";
> +
> + status = "disabled";
> +
> + dwc3_1: dwc3@11000000 {
> + compatible = "snps,dwc3";
> + reg = <0x11000000 0xcd00>;
> + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
> + phys = <&hs_phy_1>, <&ss_phy_1>;
> + phy-names = "usb2-phy", "usb3-phy";
> + dr_mode = "host";
> + snps,dis_u3_susphy_quirk;
> + };
> + };
> +
> vsdcc_fixed: vsdcc-regulator {
> compatible = "regulator-fixed";
> regulator-name = "SDCC Power";
> --
> 2.20.1
>
