Hi, This series adds support for the thermal sensor that is found on NVIDIA Tegra30 SoC. Sensor monitors temperature and voltage of the SoC, it also emits signals to the power management and clock controllers that are performing the emergency shut down and the CPU frequency throttling when a pre-programmed temperature levels are reached. Please note that this series is made on top of ACMTON patches! [1]. Otherwise tegra30.dtsi will fail to compile. [1] https://patchwork.ozlabs.org/project/linux-tegra/list/?series=243115 Changelog: v3: - No code changes. CC'ed linux-pm, which was previously missed by accident. Not sure how much that is important for the thermal patches, but won't hurt to re-send since only DT binding was reviewed so far. v2: - Made a very minor improvement to one error message, it now prints number of channel at which error occurred. - Added r-b from Rob Herring to the binding. Dmitry Osipenko (7): dt-bindings: thermal: Add binding for Tegra30 thermal sensor thermal: thermal_of: Stop zone device before unregistering it thermal/core: Export thermal_cooling_device_stats_update() thermal/drivers/tegra: Add driver for Tegra30 thermal sensor ARM: tegra_defconfig: Enable CONFIG_TEGRA30_TSENSOR ARM: multi_v7_defconfig: Enable CONFIG_TEGRA30_TSENSOR ARM: tegra: Add SoC thermal sensor to Tegra30 device-trees .../thermal/nvidia,tegra30-tsensor.yaml | 78 ++ arch/arm/boot/dts/tegra30-ouya.dts | 16 + arch/arm/boot/dts/tegra30.dtsi | 93 ++- arch/arm/configs/multi_v7_defconfig | 1 + arch/arm/configs/tegra_defconfig | 1 + drivers/thermal/tegra/Kconfig | 7 + drivers/thermal/tegra/Makefile | 1 + drivers/thermal/tegra/tegra30-tsensor.c | 736 ++++++++++++++++++ drivers/thermal/thermal_of.c | 3 + drivers/thermal/thermal_sysfs.c | 1 + 10 files changed, 933 insertions(+), 4 deletions(-) create mode 100644 Documentation/devicetree/bindings/thermal/nvidia,tegra30-tsensor.yaml create mode 100644 drivers/thermal/tegra/tegra30-tsensor.c -- 2.30.2
