This reverts commit 278407a53c3b33fb820332c4d39eb39316c3879a. The original change breaks USB config on Raspberry Pi Zero and Pi 4 B, because it exceeds the total fifo size of 4080. A naive attempt to reduce g-tx-fifo-size doesn't help on Raspberry Pi Zero. So better go back. Fixes: 278407a53c3b ("ARM: dts: bcm283x: increase dwc2's RX FIFO size") Signed-off-by: Stefan Wahren <stefan.wahren@xxxxxxxx> Cc: Pavel Hofman <pavel.hofman@xxxxxxxxxxx> --- arch/arm/boot/dts/bcm283x-rpi-usb-otg.dtsi | 2 +- arch/arm/boot/dts/bcm283x-rpi-usb-peripheral.dtsi | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/bcm283x-rpi-usb-otg.dtsi b/arch/arm/boot/dts/bcm283x-rpi-usb-otg.dtsi index 20322de..e2fd961 100644 --- a/arch/arm/boot/dts/bcm283x-rpi-usb-otg.dtsi +++ b/arch/arm/boot/dts/bcm283x-rpi-usb-otg.dtsi @@ -1,7 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 &usb { dr_mode = "otg"; - g-rx-fifo-size = <558>; + g-rx-fifo-size = <256>; g-np-tx-fifo-size = <32>; /* * According to dwc2 the sum of all device EP diff --git a/arch/arm/boot/dts/bcm283x-rpi-usb-peripheral.dtsi b/arch/arm/boot/dts/bcm283x-rpi-usb-peripheral.dtsi index 1409d1b..0ff0e9e 100644 --- a/arch/arm/boot/dts/bcm283x-rpi-usb-peripheral.dtsi +++ b/arch/arm/boot/dts/bcm283x-rpi-usb-peripheral.dtsi @@ -1,7 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 &usb { dr_mode = "peripheral"; - g-rx-fifo-size = <558>; + g-rx-fifo-size = <256>; g-np-tx-fifo-size = <32>; g-tx-fifo-size = <256 256 512 512 512 768 768>; }; -- 2.7.4