Re: [PATCH v3 5/7] i2c: aspeed: Add aspeed_set_slave_busy()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 21/05/2021 13:09, Ryan Chen wrote:
-----Original Message-----
From: Quan Nguyen <quan@xxxxxxxxxxxxxxxxxxxxxx>
Sent: Thursday, May 20, 2021 10:10 PM
To: Ryan Chen <ryan_chen@xxxxxxxxxxxxxx>; Corey Minyard
<minyard@xxxxxxx>; Rob Herring <robh+dt@xxxxxxxxxx>; Joel Stanley
<joel@xxxxxxxxx>; Andrew Jeffery <andrew@xxxxxxxx>; Brendan Higgins
<brendanhiggins@xxxxxxxxxx>; Benjamin Herrenschmidt
<benh@xxxxxxxxxxxxxxxxxxx>; Wolfram Sang <wsa@xxxxxxxxxx>; Philipp Zabel
<p.zabel@xxxxxxxxxxxxxx>; openipmi-developer@xxxxxxxxxxxxxxxxxxxxx;
devicetree@xxxxxxxxxxxxxxx; linux-arm-kernel@xxxxxxxxxxxxxxxxxxx;
linux-aspeed@xxxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx;
linux-i2c@xxxxxxxxxxxxxxx
Cc: Open Source Submission <patches@xxxxxxxxxxxxxxxxxxx>; Thang Q .
Nguyen <thang@xxxxxxxxxxxxxxxxxxxxxx>; Phong Vo
<phong@xxxxxxxxxxxxxxxxxxxxxx>; openbmc@xxxxxxxxxxxxxxxx
Subject: Re: [PATCH v3 5/7] i2c: aspeed: Add aspeed_set_slave_busy()

On 20/05/2021 18:06, Ryan Chen wrote:
-----Original Message-----
From: openbmc
<openbmc-bounces+ryan_chen=aspeedtech.com@xxxxxxxxxxxxxxxx> On
Behalf
Of Quan Nguyen
Sent: Wednesday, May 19, 2021 3:50 PM
To: Corey Minyard <minyard@xxxxxxx>; Rob Herring
<robh+dt@xxxxxxxxxx>; Joel Stanley <joel@xxxxxxxxx>; Andrew Jeffery
<andrew@xxxxxxxx>; Brendan Higgins <brendanhiggins@xxxxxxxxxx>;
Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>; Wolfram Sang
<wsa@xxxxxxxxxx>; Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>;
openipmi-developer@xxxxxxxxxxxxxxxxxxxxx;
devicetree@xxxxxxxxxxxxxxx; linux-arm-kernel@xxxxxxxxxxxxxxxxxxx;
linux-aspeed@xxxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx;
linux-i2c@xxxxxxxxxxxxxxx
Cc: Open Source Submission <patches@xxxxxxxxxxxxxxxxxxx>; Thang Q .
Nguyen <thang@xxxxxxxxxxxxxxxxxxxxxx>; Phong Vo
<phong@xxxxxxxxxxxxxxxxxxxxxx>; openbmc@xxxxxxxxxxxxxxxx
Subject: [PATCH v3 5/7] i2c: aspeed: Add aspeed_set_slave_busy()

Slave i2c device on AST2500 received a lot of slave irq while it is
busy processing the response. To handle this case, adds and exports
aspeed_set_slave_busy() for controller to temporary stop slave irq
while slave is handling the response, and re-enable them again when the
response is ready.

Signed-off-by: Quan Nguyen <quan@xxxxxxxxxxxxxxxxxxxxxx>
---
v3:
    + First introduce in v3 [Quan]

   drivers/i2c/busses/i2c-aspeed.c | 20 ++++++++++++++++++++
   1 file changed, 20 insertions(+)

diff --git a/drivers/i2c/busses/i2c-aspeed.c
b/drivers/i2c/busses/i2c-aspeed.c index b2e9c8f0ddf7..9926d04831a2
100644
--- a/drivers/i2c/busses/i2c-aspeed.c
+++ b/drivers/i2c/busses/i2c-aspeed.c
@@ -944,6 +944,26 @@ static int aspeed_i2c_init(struct aspeed_i2c_bus
*bus,
   	return 0;
   }

+#if IS_ENABLED(CONFIG_I2C_SLAVE)
+void aspeed_set_slave_busy(struct i2c_adapter *adap, bool busy) {
+	struct aspeed_i2c_bus *bus = i2c_get_adapdata(adap);
+	unsigned long current_mask, flags;
+
+	spin_lock_irqsave(&bus->lock, flags);
+
+	current_mask = readl(bus->base + ASPEED_I2C_INTR_CTRL_REG);
+	if (busy)
+		current_mask &= ~(ASPEED_I2CD_INTR_RX_DONE |
ASPEED_I2CD_INTR_SLAVE_MATCH);
+	else
+		current_mask |= ASPEED_I2CD_INTR_RX_DONE |
ASPEED_I2CD_INTR_SLAVE_MATCH;
+	writel(current_mask, bus->base + ASPEED_I2C_INTR_CTRL_REG);
+
+	spin_unlock_irqrestore(&bus->lock, flags); }
+EXPORT_SYMBOL_GPL(aspeed_set_slave_busy);
+#endif
+
   static int aspeed_i2c_reset(struct aspeed_i2c_bus *bus)  {
   	struct platform_device *pdev = to_platform_device(bus->dev);
--
2.28.0

Hello,
	The better idea is use disable i2c slave mode.
	Due to if i2c controller running in slave will get slave match, and latch the
SCL.
	Until cpu clear interrupt status.
Ryan

Thanks Ryan,

Do you mean to enable/disable slave function as per example code below ?
Yes. it is.

Dear Ryan,

This solution looks good. I'll switch to use this way in next version.
Thanks for the suggestion.

- Quan


          /* Turn on slave mode. */
          func_ctrl_reg_val = readl(bus->base +
ASPEED_I2C_FUN_CTRL_REG);
          func_ctrl_reg_val |= ASPEED_I2CD_SLAVE_EN;
          writel(func_ctrl_reg_val, bus->base +
ASPEED_I2C_FUN_CTRL_REG);

Will try this idea.
- Quan




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux