From: Rafał Miłecki <rafal@xxxxxxxxxx>
This helps validating DTS files.
Introduced changes:
1. Swapped #address-cells and #size-cells values
2. Renamed node: s/enet-gphy/ethernet-phy@/
Signed-off-by: Rafał Miłecki <rafal@xxxxxxxxxx>
---
.../bindings/net/brcm,iproc-mdio.txt | 23 -----------
.../bindings/net/brcm,iproc-mdio.yaml | 38 +++++++++++++++++++
2 files changed, 38 insertions(+), 23 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/net/brcm,iproc-mdio.txt
create mode 100644 Documentation/devicetree/bindings/net/brcm,iproc-mdio.yaml
diff --git a/Documentation/devicetree/bindings/net/brcm,iproc-mdio.txt b/Documentation/devicetree/bindings/net/brcm,iproc-mdio.txt
deleted file mode 100644
index 8ba9ed11d716..000000000000
--- a/Documentation/devicetree/bindings/net/brcm,iproc-mdio.txt
+++ /dev/null
@@ -1,23 +0,0 @@
-* Broadcom iProc MDIO bus controller
-
-Required properties:
-- compatible: should be "brcm,iproc-mdio"
-- reg: address and length of the register set for the MDIO interface
-- #size-cells: must be 1
-- #address-cells: must be 0
-
-Child nodes of this MDIO bus controller node are standard Ethernet PHY device
-nodes as described in Documentation/devicetree/bindings/net/phy.txt
-
-Example:
-
-mdio@18002000 {
- compatible = "brcm,iproc-mdio";
- reg = <0x18002000 0x8>;
- #size-cells = <1>;
- #address-cells = <0>;
-
- enet-gphy@0 {
- reg = <0>;
- };
-};
diff --git a/Documentation/devicetree/bindings/net/brcm,iproc-mdio.yaml b/Documentation/devicetree/bindings/net/brcm,iproc-mdio.yaml
new file mode 100644
index 000000000000..3031395f7e6e
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/brcm,iproc-mdio.yaml
@@ -0,0 +1,38 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/brcm,iproc-mdio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom iProc MDIO bus controller
+
+maintainers:
+ - Rafał Miłecki <rafal@xxxxxxxxxx>
+
+allOf:
+ - $ref: mdio.yaml#
+
+properties:
+ compatible:
+ const: brcm,iproc-mdio
+
+ reg:
+ maxItems: 1
+
+unevaluatedProperties: false
+
+required:
+ - reg
+
+examples:
+ - |
+ mdio@18002000 {
+ compatible = "brcm,iproc-mdio";
+ reg = <0x18002000 0x8>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethernet-phy@0 {
+ reg = <0>;
+ };
+ };
--
2.26.2
