RK3066's VPU IP block is the predecessor from what RK3288 has.
The hardware differences are:
- supports decoding frame sizes up to 1920x1088 only
- doesn't have the 'G1_REG_SOFT_RESET' register
(requires another .reset callback for hantro_codec_ops,
since writing this register will result in non-working
IP block)
- has one ACLK/HCLK per vdpu/vepu
- ACLKs can be clocked up to 300 MHz only
- no MMU
(no changes required: CMA will be transparently used)
Add a new RK3066 variant which reflect this differences. This variant
can be used for RK3188 as well.
Signed-off-by: Alex Bee <knaerzche@xxxxxxxxx>
---
Changes in v2:
- fixed wrong index in clk array for vepu clock in rk3066_vpu_hw_init
- added comment, why this variant can't be splitted in g1/h1 variants
drivers/staging/media/hantro/hantro_drv.c | 1 +
drivers/staging/media/hantro/hantro_hw.h | 1 +
.../staging/media/hantro/rockchip_vpu_hw.c | 121 ++++++++++++++++++
3 files changed, 123 insertions(+)
diff --git a/drivers/staging/media/hantro/hantro_drv.c b/drivers/staging/media/hantro/hantro_drv.c
index 2f7035a14804..ae6d970b7536 100644
--- a/drivers/staging/media/hantro/hantro_drv.c
+++ b/drivers/staging/media/hantro/hantro_drv.c
@@ -486,6 +486,7 @@ static const struct v4l2_file_operations hantro_fops = {
static const struct of_device_id of_hantro_match[] = {
#ifdef CONFIG_VIDEO_HANTRO_ROCKCHIP
+ { .compatible = "rockchip,rk3066-vpu", .data = &rk3066_vpu_variant, },
{ .compatible = "rockchip,rk3288-vpu", .data = &rk3288_vpu_variant, },
{ .compatible = "rockchip,rk3328-vpu", .data = &rk3328_vpu_variant, },
{ .compatible = "rockchip,rk3399-vpu", .data = &rk3399_vpu_variant, },
diff --git a/drivers/staging/media/hantro/hantro_hw.h b/drivers/staging/media/hantro/hantro_hw.h
index 9798c99b0e25..0da8da753447 100644
--- a/drivers/staging/media/hantro/hantro_hw.h
+++ b/drivers/staging/media/hantro/hantro_hw.h
@@ -161,6 +161,7 @@ enum hantro_enc_fmt {
};
extern const struct hantro_variant imx8mq_vpu_variant;
+extern const struct hantro_variant rk3066_vpu_variant;
extern const struct hantro_variant rk3288_vpu_variant;
extern const struct hantro_variant rk3328_vpu_variant;
extern const struct hantro_variant rk3399_vpu_variant;
diff --git a/drivers/staging/media/hantro/rockchip_vpu_hw.c b/drivers/staging/media/hantro/rockchip_vpu_hw.c
index 175d0c5dfdbe..deb263de8fec 100644
--- a/drivers/staging/media/hantro/rockchip_vpu_hw.c
+++ b/drivers/staging/media/hantro/rockchip_vpu_hw.c
@@ -10,9 +10,11 @@
#include "hantro.h"
#include "hantro_jpeg.h"
+#include "hantro_g1_regs.h"
#include "hantro_h1_regs.h"
#include "rockchip_vpu2_regs.h"
+#define RK3066_ACLK_MAX_FREQ (300 * 1000 * 1000)
#define RK3288_ACLK_MAX_FREQ (400 * 1000 * 1000)
/*
@@ -63,6 +65,52 @@ static const struct hantro_fmt rockchip_vpu1_postproc_fmts[] = {
},
};
+static const struct hantro_fmt rk3066_vpu_dec_fmts[] = {
+ {
+ .fourcc = V4L2_PIX_FMT_NV12,
+ .codec_mode = HANTRO_MODE_NONE,
+ },
+ {
+ .fourcc = V4L2_PIX_FMT_H264_SLICE,
+ .codec_mode = HANTRO_MODE_H264_DEC,
+ .max_depth = 2,
+ .frmsize = {
+ .min_width = 48,
+ .max_width = 1920,
+ .step_width = MB_DIM,
+ .min_height = 48,
+ .max_height = 1088,
+ .step_height = MB_DIM,
+ },
+ },
+ {
+ .fourcc = V4L2_PIX_FMT_MPEG2_SLICE,
+ .codec_mode = HANTRO_MODE_MPEG2_DEC,
+ .max_depth = 2,
+ .frmsize = {
+ .min_width = 48,
+ .max_width = 1920,
+ .step_width = MB_DIM,
+ .min_height = 48,
+ .max_height = 1088,
+ .step_height = MB_DIM,
+ },
+ },
+ {
+ .fourcc = V4L2_PIX_FMT_VP8_FRAME,
+ .codec_mode = HANTRO_MODE_VP8_DEC,
+ .max_depth = 2,
+ .frmsize = {
+ .min_width = 48,
+ .max_width = 1920,
+ .step_width = MB_DIM,
+ .min_height = 48,
+ .max_height = 1088,
+ .step_height = MB_DIM,
+ },
+ },
+};
+
static const struct hantro_fmt rk3288_vpu_dec_fmts[] = {
{
.fourcc = V4L2_PIX_FMT_NV12,
@@ -196,6 +244,14 @@ static irqreturn_t rockchip_vpu2_vepu_irq(int irq, void *dev_id)
return IRQ_HANDLED;
}
+static int rk3066_vpu_hw_init(struct hantro_dev *vpu)
+{
+ /* Bump ACLKs to max. possible freq. to improve performance. */
+ clk_set_rate(vpu->clocks[0].clk, RK3066_ACLK_MAX_FREQ);
+ clk_set_rate(vpu->clocks[2].clk, RK3066_ACLK_MAX_FREQ);
+ return 0;
+}
+
static int rockchip_vpu_hw_init(struct hantro_dev *vpu)
{
/* Bump ACLK to max. possible freq. to improve performance. */
@@ -203,6 +259,14 @@ static int rockchip_vpu_hw_init(struct hantro_dev *vpu)
return 0;
}
+static void rk3066_vpu_dec_reset(struct hantro_ctx *ctx)
+{
+ struct hantro_dev *vpu = ctx->dev;
+
+ vdpu_write(vpu, G1_REG_INTERRUPT_DEC_IRQ_DIS, G1_REG_INTERRUPT);
+ vdpu_write(vpu, G1_REG_CONFIG_DEC_CLK_GATE_E, G1_REG_CONFIG);
+}
+
static void rockchip_vpu1_enc_reset(struct hantro_ctx *ctx)
{
struct hantro_dev *vpu = ctx->dev;
@@ -233,6 +297,33 @@ static void rockchip_vpu2_enc_reset(struct hantro_ctx *ctx)
/*
* Supported codec ops.
*/
+static const struct hantro_codec_ops rk3066_vpu_codec_ops[] = {
+ [HANTRO_MODE_JPEG_ENC] = {
+ .run = hantro_h1_jpeg_enc_run,
+ .reset = rockchip_vpu1_enc_reset,
+ .init = hantro_jpeg_enc_init,
+ .done = hantro_jpeg_enc_done,
+ .exit = hantro_jpeg_enc_exit,
+ },
+ [HANTRO_MODE_H264_DEC] = {
+ .run = hantro_g1_h264_dec_run,
+ .reset = rk3066_vpu_dec_reset,
+ .init = hantro_h264_dec_init,
+ .exit = hantro_h264_dec_exit,
+ },
+ [HANTRO_MODE_MPEG2_DEC] = {
+ .run = hantro_g1_mpeg2_dec_run,
+ .reset = rk3066_vpu_dec_reset,
+ .init = hantro_mpeg2_dec_init,
+ .exit = hantro_mpeg2_dec_exit,
+ },
+ [HANTRO_MODE_VP8_DEC] = {
+ .run = hantro_g1_vp8_dec_run,
+ .reset = rk3066_vpu_dec_reset,
+ .init = hantro_vp8_dec_init,
+ .exit = hantro_vp8_dec_exit,
+ },
+};
static const struct hantro_codec_ops rk3288_vpu_codec_ops[] = {
[HANTRO_MODE_JPEG_ENC] = {
@@ -301,10 +392,40 @@ static const struct hantro_irq rockchip_vpu2_irqs[] = {
{ "vdpu", rockchip_vpu2_vdpu_irq },
};
+static const char * const rk3066_clk_names[] = {
+ "aclk_vdpu", "hclk_vdpu",
+ "aclk_vepu", "hclk_vepu"
+};
+
static const char * const rockchip_vpu_clk_names[] = {
"aclk", "hclk"
};
+/*
+ * Despite this variant has separate clocks for decoder and encoder,
+ * it's still required to enable all four of them for either decoding
+ * or encoding and we can't split it in separate g1/h1 variants.
+ */
+const struct hantro_variant rk3066_vpu_variant = {
+ .enc_offset = 0x0,
+ .enc_fmts = rockchip_vpu_enc_fmts,
+ .num_enc_fmts = ARRAY_SIZE(rockchip_vpu_enc_fmts),
+ .dec_offset = 0x400,
+ .dec_fmts = rk3066_vpu_dec_fmts,
+ .num_dec_fmts = ARRAY_SIZE(rk3066_vpu_dec_fmts),
+ .postproc_fmts = rockchip_vpu1_postproc_fmts,
+ .num_postproc_fmts = ARRAY_SIZE(rockchip_vpu1_postproc_fmts),
+ .postproc_regs = &hantro_g1_postproc_regs,
+ .codec = HANTRO_JPEG_ENCODER | HANTRO_MPEG2_DECODER |
+ HANTRO_VP8_DECODER | HANTRO_H264_DECODER,
+ .codec_ops = rk3066_vpu_codec_ops,
+ .irqs = rockchip_vpu1_irqs,
+ .num_irqs = ARRAY_SIZE(rockchip_vpu1_irqs),
+ .init = rk3066_vpu_hw_init,
+ .clk_names = rk3066_clk_names,
+ .num_clocks = ARRAY_SIZE(rk3066_clk_names)
+};
+
const struct hantro_variant rk3288_vpu_variant = {
.enc_offset = 0x0,
.enc_fmts = rockchip_vpu_enc_fmts,
--
2.27.0
