Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx> 於 2021年3月30日 週二 下午7:48寫道：
>
>
> On Mon, 2021-01-18 at 20:41 +0800, Gene Chen wrote:
> > From: Gene Chen <gene_chen@xxxxxxxxxxx>
> >
> > Add basic support for the battery charger for MT6360 PMIC
> >
> > Signed-off-by: Gene Chen <gene_chen@xxxxxxxxxxx>
> > ---
> > drivers/power/supply/Kconfig | 10 +
> > drivers/power/supply/Makefile | 1 +
> > drivers/power/supply/mt6360_charger.c | 914
> > ++++++++++++++++++++++++++++++++++
> > 3 files changed, 925 insertions(+)
> > create mode 100644 drivers/power/supply/mt6360_charger.c
> >
>
> Thanks for the contribution :)
>
> Few comments which I am not demanding to be 'fixed' - but which might
> be good to be checked. Eg, please consider my comments as 'nit's.
>
> ...
>
> > +static unsigned int mt6360_map_reg_sel(u32 data, u32 min, u32 max,
> > u32 step)
> > +{
> > + u32 target = 0, max_sel;
> > +
> > + if (data >= min) {
> > + target = (data - min) / step;
> > + max_sel = (max - min) / step;
> > + if (target > max_sel)
> > + target = max_sel;
> > + }
> > + return target;
> > +}
>
> lib/linear_ranges.c might already implement this ...
>
I found we are neither linear_range_get_selector_high or
linear_range_get_selector_low.
When value lower than min_value, choose min_sel. If higher than
max_value, choose max_sel.
Should I create linear_range_get_selector() for this?
> > +
> > +static u32 mt6360_map_real_val(u32 sel, u32 min, u32 max, u32 step)
> > +{
> > + u32 target = 0;
> > +
> > + target = min + (sel * step);
> > + if (target > max)
> > + target = max;
> > + return target;
> > +}
>
> ...and this.
>
ACK, We can use "linear_range_get_value", but maybe wait for reply
about "mt6360_map_reg_sel"
> > +static int mt6360_charger_get_ichg(struct mt6360_chg_info *mci,
> > + union power_supply_propval *val)
> > +{
> > + int ret;
> > + unsigned int regval;
> > +
> > + ret = regmap_read(mci->regmap, MT6360_PMU_CHG_CTRL7, ®val);
> > + if (ret < 0)
> > + return ret;
> > + regval = (regval & MT6360_ICHG_MASK) >> MT6360_ICHG_SHFT;
> > + val->intval = mt6360_map_real_val(regval,
> > + MT6360_ICHG_MIN,
> > + MT6360_ICHG_MAX,
> > + MT6360_ICHG_STEP);
>
> linear_ranges?
>
> > + return 0;
> > +}
> > +
> > +static int mt6360_charger_get_max_ichg(struct mt6360_chg_info *mci,
> > + union power_supply_propval *val)
> > +{
> > + val->intval = MT6360_ICHG_MAX;
> > + return 0;
> > +}
> > +
> > +static int mt6360_charger_get_cv(struct mt6360_chg_info *mci,
> > + union power_supply_propval *val)
> > +{
> > + int ret;
> > + unsigned int regval;
> > +
> > + ret = regmap_read(mci->regmap, MT6360_PMU_CHG_CTRL4, ®val);
> > + if (ret < 0)
> > + return ret;
> > + regval = (regval & MT6360_VOREG_MASK) >> MT6360_VOREG_SHFT;
> > + val->intval = mt6360_map_real_val(regval,
> > + MT6360_VOREG_MIN,
> > + MT6360_VOREG_MAX,
> > + MT6360_VOREG_STEP);
>
> linear_ranges?
>
> > + return 0;
> > +}
> > +
> > +static int mt6360_charger_get_max_cv(struct mt6360_chg_info *mci,
> > + union power_supply_propval *val)
> > +{
> > + val->intval = MT6360_VOREG_MAX;
> > + return 0;
> > +}
> > +
> > +static int mt6360_charger_get_aicr(struct mt6360_chg_info *mci,
> > + union power_supply_propval *val)
> > +{
> > + int ret;
> > + unsigned int regval;
> > +
> > + ret = regmap_read(mci->regmap, MT6360_PMU_CHG_CTRL3, ®val);
> > + if (ret < 0)
> > + return ret;
> > + regval = (regval & MT6360_IAICR_MASK) >> MT6360_IAICR_SHFT;
> > + val->intval = mt6360_map_real_val(regval,
> > + MT6360_AICR_MIN,
> > + MT6360_AICR_MAX,
> > + MT6360_AICR_STEP);
>
> linear_ranges?
>
> > + return 0;
> > +}
> > +
> > +static int mt6360_charger_get_mivr(struct mt6360_chg_info *mci,
> > + union power_supply_propval *val)
> > +{
> > + int ret;
> > + unsigned int regval;
> > +
> > + ret = regmap_read(mci->regmap, MT6360_PMU_CHG_CTRL6, ®val);
> > + if (ret < 0)
> > + return ret;
> > + regval = (regval & MT6360_VMIVR_MASK) >> MT6360_VMIVR_SHFT;
> > + val->intval = mt6360_map_real_val(regval,
> > + MT6360_VMIVR_MIN,
> > + MT6360_VMIVR_MAX,
> > + MT6360_VMIVR_STEP);
>
> linear_ranges?
>
> > + return 0;
> > +}
> > +
> > +static int mt6360_charger_get_iprechg(struct mt6360_chg_info *mci,
> > + union power_supply_propval *val)
> > +{
> > + int ret;
> > + unsigned int regval;
> > +
> > + ret = regmap_read(mci->regmap, MT6360_PMU_CHG_CTRL8, ®val);
> > + if (ret < 0)
> > + return ret;
> > + regval = (regval & MT6360_IPREC_MASK) >> MT6360_IPREC_SHFT;
> > + val->intval = mt6360_map_real_val(regval,
> > + MT6360_IPREC_MIN,
> > + MT6360_IPREC_MAX,
> > + MT6360_IPREC_STEP);
>
> linear_ranges?
>
> > + return 0;
> > +}
> > +
> > +static int mt6360_charger_get_ieoc(struct mt6360_chg_info *mci,
> > + union power_supply_propval *val)
> > +{
> > + int ret;
> > + unsigned int regval;
> > +
> > + ret = regmap_read(mci->regmap, MT6360_PMU_CHG_CTRL9, ®val);
> > + if (ret < 0)
> > + return ret;
> > + regval = (regval & MT6360_IEOC_MASK) >> MT6360_IEOC_SHFT;
> > + val->intval = mt6360_map_real_val(regval,
> > + MT6360_IEOC_MIN,
> > + MT6360_IEOC_MAX,
> > + MT6360_IEOC_STEP);
>
> linear_ranges?
>
> > + return 0;
> > +}
> > +
> > +static int mt6360_charger_set_online(struct mt6360_chg_info *mci,
> > + const union power_supply_propval
> > *val)
> > +{
> > + u8 force_sleep = val->intval ? 0 : 1;
> > +
> > + return regmap_update_bits(mci->regmap,
> > + MT6360_PMU_CHG_CTRL1,
> > + MT6360_FSLP_MASK,
> > + force_sleep << MT6360_FSLP_SHFT);
> > +}
> > +
> > +static int mt6360_charger_set_ichg(struct mt6360_chg_info *mci,
> > + const union power_supply_propval
> > *val)
> > +{
> > + u8 sel;
> > +
> > + sel = mt6360_map_reg_sel(val->intval,
> > + MT6360_ICHG_MIN,
> > + MT6360_ICHG_MAX,
> > + MT6360_ICHG_STEP);
>
> linear_ranges?
>
> > + return regmap_update_bits(mci->regmap,
> > + MT6360_PMU_CHG_CTRL7,
> > + MT6360_ICHG_MASK,
> > + sel << MT6360_ICHG_SHFT);
> > +}
> > +
> > +static int mt6360_charger_set_cv(struct mt6360_chg_info *mci,
> > + const union power_supply_propval *val)
> > +{
> > + u8 sel;
> > +
> > + sel = mt6360_map_reg_sel(val->intval,
> > + MT6360_VOREG_MIN,
> > + MT6360_VOREG_MAX,
> > + MT6360_VOREG_STEP);
>
> linear_ranges?
>
> > + return regmap_update_bits(mci->regmap,
> > + MT6360_PMU_CHG_CTRL4,
> > + MT6360_VOREG_MASK,
> > + sel << MT6360_VOREG_SHFT);
> > +}
> > +
> > +static int mt6360_charger_set_aicr(struct mt6360_chg_info *mci,
> > + const union power_supply_propval
> > *val)
> > +{
> > + u8 sel;
> > +
> > + sel = mt6360_map_reg_sel(val->intval,
> > + MT6360_AICR_MIN,
> > + MT6360_AICR_MAX,
> > + MT6360_AICR_STEP);
>
> linear_ranges?
>
> > + return regmap_update_bits(mci->regmap,
> > + MT6360_PMU_CHG_CTRL3,
> > + MT6360_IAICR_MASK,
> > + sel << MT6360_IAICR_SHFT);
> > +}
> > +
> > +static int mt6360_charger_set_mivr(struct mt6360_chg_info *mci,
> > + const union power_supply_propval
> > *val)
> > +{
> > + u8 sel;
> > +
> > + sel = mt6360_map_reg_sel(val->intval,
> > + MT6360_VMIVR_MIN,
> > + MT6360_VMIVR_MAX,
> > + MT6360_VMIVR_STEP);
>
> linear_ranges?
>
> > + return regmap_update_bits(mci->regmap,
> > + MT6360_PMU_CHG_CTRL3,
> > + MT6360_VMIVR_MASK,
> > + sel << MT6360_VMIVR_SHFT);
> > +}
> > +
> > +static int mt6360_charger_set_iprechg(struct mt6360_chg_info *mci,
> > + const union power_supply_propval
> > *val)
> > +{
> > + u8 sel;
> > +
> > + sel = mt6360_map_reg_sel(val->intval,
> > + MT6360_IPREC_MIN,
> > + MT6360_IPREC_MAX,
> > + MT6360_IPREC_STEP);
>
> linear_ranges?
>
> > + return regmap_update_bits(mci->regmap,
> > + MT6360_PMU_CHG_CTRL8,
> > + MT6360_IPREC_MASK,
> > + sel << MT6360_IPREC_SHFT);
> > +}
> > +
> > +static int mt6360_charger_set_ieoc(struct mt6360_chg_info *mci,
> > + const union power_supply_propval
> > *val)
> > +{
> > + u8 sel;
> > +
> > + sel = mt6360_map_reg_sel(val->intval,
> > + MT6360_IEOC_MIN,
> > + MT6360_IEOC_MAX,
> > + MT6360_IEOC_STEP);
>
> linear_ranges?
>
> > + return regmap_update_bits(mci->regmap,
> > + MT6360_PMU_CHG_CTRL9,
> > + MT6360_IEOC_MASK,
> > + sel << MT6360_IEOC_SHFT);
> > +}
> > +
> > +
>
>
>
> > +static const struct regulator_ops mt6360_chg_otg_ops = {
> > + .list_voltage = regulator_list_voltage_linear,
> > + .enable = regulator_enable_regmap,
> > + .disable = regulator_disable_regmap,
> > + .is_enabled = regulator_is_enabled_regmap,
> > + .set_voltage_sel = regulator_set_voltage_sel_regmap,
> > + .get_voltage_sel = regulator_get_voltage_sel_regmap,
> > +};
> > +
> > +static const struct regulator_desc mt6360_otg_rdesc = {
> > + .of_match = "usb-otg-vbus",
> > + .name = "usb-otg-vbus",
> > + .ops = &mt6360_chg_otg_ops,
> > + .owner = THIS_MODULE,
> > + .type = REGULATOR_VOLTAGE,
> > + .min_uV = 4425000,
> > + .uV_step = 25000,
> > + .n_voltages = 57,
> > + .vsel_reg = MT6360_PMU_CHG_CTRL5,
> > + .vsel_mask = MT6360_VOBST_MASK,
> > + .enable_reg = MT6360_PMU_CHG_CTRL1,
> > + .enable_mask = MT6360_OPA_MODE_MASK,
> > +};
>
> Any particular reason why these are here and not in a regulator driver?
>
MT6360 charger is a switching charger which can charging or boost OTG VBUS.
> ...
>
> > +static int mt6360_charger_probe(struct platform_device *pdev)
> > +{
> > + struct mt6360_chg_info *mci;
> > + struct power_supply_config charger_cfg = {};
> > + struct regulator_config config = { };
> > + int ret;
> > +
> > + mci = devm_kzalloc(&pdev->dev, sizeof(*mci), GFP_KERNEL);
> > + if (!mci)
> > + return -ENOMEM;
> > +
> > + ret = mt6360_parse_dt(pdev);
> > + if (ret)
> > + return dev_err_probe(&pdev->dev, ret, "Failed to parse
> > dt\n");
> > +
> > + mci->dev = &pdev->dev;
> > + mci->vinovp = 6500000;
> > + mutex_init(&mci->chgdet_lock);
> > + platform_set_drvdata(pdev, mci);
> > + INIT_WORK(&mci->chrdet_work, &mt6360_chrdet_work);
> > +
> > + mci->regmap = dev_get_regmap(pdev->dev.parent, NULL);
> > + if (!mci->regmap)
> > + return dev_err_probe(&pdev->dev, -ENODEV, "Failed to
> > get parent regmap\n");
> > +
> > + ret = mt6360_apply_dt(pdev);
> > + if (ret)
> > + return dev_err_probe(&pdev->dev, ret, "Failed to apply
> > dt\n");
> > +
> > + memcpy(&mci->psy_desc, &mt6360_charger_desc, sizeof(mci-
> > >psy_desc));
> > + mci->psy_desc.name = dev_name(&pdev->dev);
> > + charger_cfg.drv_data = mci;
> > + charger_cfg.of_node = pdev->dev.of_node;
> > + mci->psy = devm_power_supply_register(&pdev->dev,
> > + &mci->psy_desc,
> > &charger_cfg);
> > + if (IS_ERR(mci->psy))
> > + return dev_err_probe(&pdev->dev, PTR_ERR(mci->psy),
> > + "Failed to register power supply
> > dev\n");
> > +
> > + ret = mt6360_chg_init_setting(mci);
> > + if (ret)
> > + return dev_err_probe(&pdev->dev, ret, "Failed to
> > initial setting\n");
> > +
> > + schedule_work(&mci->chrdet_work);
>
> Is this work scheduled anywhere else? If not - why doing this in wq
> context? If yes - does this wq need cancellation upon exit?
>
MT6360 MFD driver probe will clear all interrupts then add charger device.
We need to schedule work for handling boot-up vbus is always exist,
because irq is already cleared.
> > +
> > + ret = mt6360_chg_irq_register(pdev);
> > + if (ret)
> > + return dev_err_probe(&pdev->dev, ret, "Failed to
> > register irqs\n");
> > +
> > + config.dev = &pdev->dev;
> > + config.regmap = mci->regmap;
> > + mci->otg_rdev = devm_regulator_register(&pdev->dev,
> > &mt6360_otg_rdesc,
> > + &config);
> > + if (IS_ERR(mci->otg_rdev))
> > + return PTR_ERR(mci->otg_rdev);
> > +
> > + return 0;
> > +}
> > +
>
> Best Regards
> Matti Vaittinen
>
