Am Montag, 24. Mai 2021, 17:21:41 CEST schrieb Marc Zyngier:
> On Mon, 24 May 2021 14:32:41 +0100,
> Andreas Färber <afaerber@xxxxxxx> wrote:
> >
> > On 17.05.21 11:21, Marc Zyngier wrote:
> > > On Mon, 17 May 2021 00:05:45 +0100,
> > > Andreas Färber <afaerber@xxxxxxx> wrote:
> > >>
> > >> Add an initial Device Tree for Rockchip RK1808 SoC.
> > >> Based on shipping TB-RK1808M0 DTB.
> > >>
> > >> Signed-off-by: Andreas Färber <afaerber@xxxxxxx>
> > >> ---
> > >> arch/arm64/boot/dts/rockchip/rk1808.dtsi | 203 +++++++++++++++++++++++
> > >> 1 file changed, 203 insertions(+)
> > >> create mode 100644 arch/arm64/boot/dts/rockchip/rk1808.dtsi
> > >>
> > >> diff --git a/arch/arm64/boot/dts/rockchip/rk1808.dtsi b/arch/arm64/boot/dts/rockchip/rk1808.dtsi
> > >> new file mode 100644
> > >> index 000000000000..af2b51afda7d
> > >> --- /dev/null
> > >> +++ b/arch/arm64/boot/dts/rockchip/rk1808.dtsi
> > [...]
> > >> + gic: interrupt-controller@ff100000 {
> > >> + compatible = "arm,gic-v3";
> > >> + reg = <0xff100000 0x10000>, /* GICD */
> > >> + <0xff140000 0xc0000>, /* GICR */
> > >
> > > This is obviously wrong. You have two CPUs, and yet describe a range
> > > that spans 6. I guess this is a copy paste from rk3399 again?
> >
> > Not on my part at least. As indicated, these numbers are what ships in
> > the DTB on the RK1808 card, as per dtc -I dtb -O dts. Could be a mistake
> > by Rockchip, of course.
> >
> > Are you suggesting 0xc0000/6*2 = 0x40000 for two CPUs here? Works
> > as bad as before - investigation still ongoing with latest next.
> >
> > As for "obviously": The GICv3 YAML binding has no description for me to
> > validate those numbers: "GIC Redistributors (GICR), one range per
> > redistributor region" - says nothing about correlation to number of CPUs
> > or size per CPU, and the examples are not explaining either: 0x200000
> > has no number of CPUs associated, and by my calculation 0x800000 for 32
> > CPUs results in 0x40000 per CPU; but then again the examples also have
> > GICC etc. at diverging 0x2000 size.
>
> The GICv3/v4 architecture spec does apply, and you should really have
> a look at what these sizes mean. What is the value of copy-pasting
> things without understanding it the first place?
>
> >
> > >> + <0xff300000 0x10000>, /* GICC */
> > >> + <0xff310000 0x10000>, /* GICH */
> > >> + <0xff320000 0x10000>; /* GICV */
> > >> + interrupt-controller;
> > >> + #interrupt-cells = <3>;
> > >> + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
> > >> + #address-cells = <1>;
> > >> + #size-cells = <1>;
> > >> + ranges;
> > >> +
> > >> + gic_its: msi-controller@ff120000 {
> > >> + compatible = "arm,gic-v3-its";
> > >> + reg = <0xff120000 0x20000>;
> > >> + msi-controller;
> > >> + #msi-cells = <1>;
> > >> + };
> > >
> > > What uses the ITS?
> >
> > DT-wise seemingly only the __symbols__ table (named just "its" there, I
> > notice), so we could drop (or rename) the label if you prefer.
>
> No, I am asking *what* uses the ITS. Is it just dangling without any
> user? No PCI bus making use of it?
just 2ct, as far as I remember the rk1808 does have a PCIe controller.
And the datasheet [0] does agree with my memory it seems
Heiko
[0] http://opensource.rock-chips.com/images/4/43/Rockchip_RK1808_Datasheet_V1.2_20190527.pdf
