On Wed, May 12, 2021 at 11:55:14AM +0200, Michal Vokáč wrote: > The imx6dl-yapp4 platform uses a GE-LX012864FWPP3N0000 OLED display. > The display consist of a 128x64 OLED panel and a SSD1305 controller. > > The OLED panel resolution is 128x64 but the built-in controller default > resolution is 132x64. To display properly a segment offset needs to be > configured. > > Signed-off-by: Michal Vokáč <michal.vokac@xxxxxxxxx> Why are you resending? Please state reason when you resend. Shawn > --- > arch/arm/boot/dts/imx6dl-yapp4-common.dtsi | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi > index 51972c85e207..111d4d331f98 100644 > --- a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi > +++ b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi > @@ -373,6 +373,7 @@ > solomon,height = <64>; > solomon,width = <128>; > solomon,page-offset = <0>; > + solomon,col-offset = <4>; > solomon,prechargep2 = <15>; > reset-gpios = <&gpio_oled 1 GPIO_ACTIVE_LOW>; > vbat-supply = <&sw2_reg>; > -- > 2.1.4 >
