USB4 device node which is defined in [1] is redefined in here causing boot failures. Remove the duplicated entry and instead extend it with child node info through corresponding label reference. [1]: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arch/arm/boot/dts/dra7-l4.dtsi#n4132 Signed-off-by: Gowtham Tammana <g-tammana@xxxxxx> --- arch/arm/boot/dts/dra74x.dtsi | 69 +++++++++++++---------------------- 1 file changed, 25 insertions(+), 44 deletions(-) diff --git a/arch/arm/boot/dts/dra74x.dtsi b/arch/arm/boot/dts/dra74x.dtsi index e1850d6c841a..6410ddbf0fca 100644 --- a/arch/arm/boot/dts/dra74x.dtsi +++ b/arch/arm/boot/dts/dra74x.dtsi @@ -49,50 +49,6 @@ dsp2_system: dsp_system@41500000 { reg = <0x41500000 0x100>; }; - target-module@48940000 { - compatible = "ti,sysc-omap4", "ti,sysc"; - reg = <0x48940000 0x4>, - <0x48940010 0x4>; - reg-names = "rev", "sysc"; - ti,sysc-mask = <SYSC_OMAP4_DMADISABLE>; - ti,sysc-midle = <SYSC_IDLE_FORCE>, - <SYSC_IDLE_NO>, - <SYSC_IDLE_SMART>, - <SYSC_IDLE_SMART_WKUP>; - ti,sysc-sidle = <SYSC_IDLE_FORCE>, - <SYSC_IDLE_NO>, - <SYSC_IDLE_SMART>, - <SYSC_IDLE_SMART_WKUP>; - clocks = <&l3init_clkctrl DRA7_L3INIT_USB_OTG_SS4_CLKCTRL 0>; - clock-names = "fck"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0x48940000 0x20000>; - - omap_dwc3_4: omap_dwc3_4@0 { - compatible = "ti,dwc3"; - reg = <0 0x10000>; - interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <1>; - utmi-mode = <2>; - ranges; - status = "disabled"; - usb4: usb@10000 { - compatible = "snps,dwc3"; - reg = <0x10000 0x17000>; - interrupts = <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "peripheral", - "host", - "otg"; - maximum-speed = "high-speed"; - dr_mode = "otg"; - }; - }; - }; - target-module@41501000 { compatible = "ti,sysc-omap2", "ti,sysc"; reg = <0x41501000 0x4>, @@ -224,3 +180,28 @@ &pcie1_ep { &pcie2_rc { compatible = "ti,dra746-pcie-rc", "ti,dra7-pcie"; }; + +&usb4_tm { + omap_dwc3_4: omap_dwc3_4@0 { + compatible = "ti,dwc3"; + reg = <0 0x10000>; + interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <1>; + utmi-mode = <2>; + ranges; + status = "disabled"; + usb4: usb@10000 { + compatible = "snps,dwc3"; + reg = <0x10000 0x17000>; + interrupts = <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "peripheral", + "host", + "otg"; + maximum-speed = "high-speed"; + dr_mode = "otg"; + }; + }; +}; -- 2.31.1
