Re: [PATCH v3 0/7] Add Aspeed SSIF BMC driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 19/05/2021 19:34, Corey Minyard wrote:
On Wed, May 19, 2021 at 02:49:27PM +0700, Quan Nguyen wrote:
This series add support for the Aspeed specific SSIF BMC driver which
is to perform in-band IPMI communication with the host in management
(BMC) side.

v3:
   + Switched binding doc to use DT schema format [Rob]
   + Splited into generic ssif_bmc and aspeed-specific [Corey, Joel]
   + Removed redundant license info [Joel]
   + Switched to use traditional if-else [Joel]
   + Removed unused ssif_bmc_ioctl() [Joel]
   + Made handle_request()/complete_response() to return void [Joel]
   + Refactored send_ssif_bmc_response()/receive_ssif_bmc_request() [Corey]
   + Remove mutex [Corey]
   + Use spin_lock/unlock_irqsave/restore in callback [Corey]
   + Removed the unnecessary memset [Corey]
   + Switch to use dev_err() [Corey]
   + Combine mask/unmask two interrupts together [Corey]
   + Fixed unhandled Tx done with NAK [Quan]
   + Late ack'ed Tx done w/wo Ack irq [Quan]
   + Use aspeed-specific exported aspeed_set_slave_busy() when slave busy
to fix the deadlock [Graeme, Philipp, Quan]
   + Clean buffer for last multipart read [Quan]
   + Handle unknown incoming command [Quan]

v2:
   + Fixed compiling error with COMPILE_TEST for arc

Quan Nguyen (7):
   i2c: i2c-core-smbus: Expose PEC calculate function for generic use

Note that for this I2C-specific change, I will need acks from the I2C
maintainers to be able to include this in my tree.
 >>    ipmi: ssif_bmc: Add SSIF BMC driver
   i2c: aspeed: Fix unhandled Tx done with NAK

For the aspeed changes, they don't really belong here, they belong in
the aspeed tree.  I see that you need them for the device to work
correctly, though.  I'll need acks from maintainers to include them.

Thanks for you information.
Will separate these i2c-aspeed's patches into other independent series in next version.

   i2c: aspeed: Acknowledge Tx done w/wo ACK irq late
   i2c: aspeed: Add aspeed_set_slave_busy()
   ipmi: ssif_bmc: Add Aspeed SSIF BMC driver
   bindings: ipmi: Add binding for Aspeed SSIF BMC driver

  .../bindings/ipmi/aspeed-ssif-bmc.yaml        |  33 +
  drivers/char/ipmi/Kconfig                     |  22 +
  drivers/char/ipmi/Makefile                    |   2 +
  drivers/char/ipmi/ssif_bmc.c                  | 605 ++++++++++++++++++
  drivers/char/ipmi/ssif_bmc.h                  |  93 +++
  drivers/char/ipmi/ssif_bmc_aspeed.c           |  75 +++
  drivers/i2c/busses/i2c-aspeed.c               |  51 +-
  drivers/i2c/i2c-core-smbus.c                  |  12 +-
  include/linux/i2c.h                           |   1 +
  9 files changed, 884 insertions(+), 10 deletions(-)
  create mode 100644 Documentation/devicetree/bindings/ipmi/aspeed-ssif-bmc.yaml
  create mode 100644 drivers/char/ipmi/ssif_bmc.c
  create mode 100644 drivers/char/ipmi/ssif_bmc.h
  create mode 100644 drivers/char/ipmi/ssif_bmc_aspeed.c

--
2.28.0





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux