On Thu, May 20, 2021 at 07:47:14AM +0200, Jiri Prchal wrote: > This exports serial number of FRAM in sysfs file named "sernum". > Formatted in hex, each byte separated by space. > Example: > $ cat /sys/class/spi_master/spi0/spi0.0/sernum No new Documentation/ABI/ entry for this? > a4 36 44 f2 ae 6c 00 00 > > Signed-off-by: Jiri Prchal <jiri.prchal@xxxxxxxxxxx> > --- > v2: no change here > v3: resend and added more recipients > v4: resend > --- > drivers/misc/eeprom/at25.c | 28 +++++++++++++++++++++++++++- > 1 file changed, 27 insertions(+), 1 deletion(-) > > diff --git a/drivers/misc/eeprom/at25.c b/drivers/misc/eeprom/at25.c > index 4f6e983c278b..b2cffeb3af2c 100644 > --- a/drivers/misc/eeprom/at25.c > +++ b/drivers/misc/eeprom/at25.c > @@ -38,6 +38,7 @@ struct at25_data { > struct nvmem_config nvmem_config; > struct nvmem_device *nvmem; > int has_sernum; > + char *sernum; > }; > > #define AT25_WREN 0x06 /* latch the write enable */ > @@ -172,6 +173,19 @@ static int fm25_aux_read(struct at25_data *at25, char *buf, uint8_t command, > return status; > } > > +static ssize_t sernum_show(struct device *dev, struct device_attribute *attr, char *buf) > +{ > + struct at25_data *at25; > + int i; > + > + at25 = dev_get_drvdata(dev); > + for (i = 0; i < FM25_SN_LEN; i++) > + buf += sprintf(buf, "%02x ", at25->sernum[i]); > + sprintf(--buf, "\n"); > + return (3 * i); No, that is not how sysfs files work, sorry. They are "one value per file". This looks like multiple values in the same file, why not just one file per "sernum"? Also, please use sysfs_emit() in the future. > +} > +static DEVICE_ATTR_RO(sernum); > + > static int at25_ee_write(void *priv, unsigned int off, void *val, size_t count) > { > struct at25_data *at25 = priv; > @@ -427,8 +441,13 @@ static int at25_probe(struct spi_device *spi) > else > at25->chip.flags |= EE_ADDR2; > > - if (id[8]) > + if (id[8]) { > at25->has_sernum = 1; > + at25->sernum = kzalloc(FM25_SN_LEN, GFP_KERNEL); > + if (!at25->sernum) > + return -ENOMEM; > + fm25_aux_read(at25, at25->sernum, FM25_RDSN, FM25_SN_LEN); > + } > else > at25->has_sernum = 0; > > @@ -467,6 +486,13 @@ static int at25_probe(struct spi_device *spi) > if (IS_ERR(at25->nvmem)) > return PTR_ERR(at25->nvmem); > > + /* Export the FM25 serial number */ > + if (at25->has_sernum) { > + err = device_create_file(&spi->dev, &dev_attr_sernum); You just raced with userspace and lost :( Please do this correctly, by setting the driver group if you need a file like this. thanks, greg k-h