On Wed, 19 May 2021 20:26:35 +0200, Miquel Raynal wrote: > Add a yaml description of this NAND controller which is described as a > subnode of the SMC bus. > > Signed-off-by: Miquel Raynal <miquel.raynal@xxxxxxxxxxx> > --- > .../bindings/mtd/arm,pl353-nand-r2p1.yaml | 45 +++++++++++++++++++ > 1 file changed, 45 insertions(+) > create mode 100644 Documentation/devicetree/bindings/mtd/arm,pl353-nand-r2p1.yaml > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: ./Documentation/devicetree/bindings/mtd/arm,pl353-nand-r2p1.yaml:25:9: [warning] wrong indentation: expected 10 but found 8 (indentation) dtschema/dtc warnings/errors: Documentation/devicetree/bindings/mtd/arm,pl353-nand-r2p1.example.dts:21.11-33: Warning (reg_format): /example-0/nand-controller@0,0:reg: property has invalid length (12 bytes) (#address-cells == 1, #size-cells == 1) Documentation/devicetree/bindings/mtd/arm,pl353-nand-r2p1.example.dt.yaml: Warning (pci_device_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/mtd/arm,pl353-nand-r2p1.example.dt.yaml: Warning (pci_device_bus_num): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/mtd/arm,pl353-nand-r2p1.example.dt.yaml: Warning (simple_bus_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/mtd/arm,pl353-nand-r2p1.example.dt.yaml: Warning (i2c_bus_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/mtd/arm,pl353-nand-r2p1.example.dt.yaml: Warning (spi_bus_reg): Failed prerequisite 'reg_format' /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/mtd/arm,pl353-nand-r2p1.example.dt.yaml: example-0: nand-controller@0,0:reg:0: [0, 0, 16777216] is too long From schema: /usr/local/lib/python3.8/dist-packages/dtschema/schemas/reg.yaml See https://patchwork.ozlabs.org/patch/1481118 This check can fail if there are any dependencies. The base for a patch series is generally the most recent rc1. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit.
