Change the node name of the UART devices to match
"^serial(@[0-9a-f,]+)*$".
Signed-off-by: Zhen Lei <thunder.leizhen@xxxxxxxxxx>
---
arch/arm64/boot/dts/bitmain/bm1880.dtsi | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/bitmain/bm1880.dtsi b/arch/arm64/boot/dts/bitmain/bm1880.dtsi
index 53a9b76057aa..22a200fb07d2 100644
--- a/arch/arm64/boot/dts/bitmain/bm1880.dtsi
+++ b/arch/arm64/boot/dts/bitmain/bm1880.dtsi
@@ -184,7 +184,7 @@
status = "disabled";
};
- uart1: serial@5801A000 {
+ uart1: serial@5801a000 {
compatible = "snps,dw-apb-uart";
reg = <0x0 0x5801a000 0x0 0x2000>;
clocks = <&clk BM1880_CLK_UART_500M>,
@@ -197,7 +197,7 @@
status = "disabled";
};
- uart2: serial@5801C000 {
+ uart2: serial@5801c000 {
compatible = "snps,dw-apb-uart";
reg = <0x0 0x5801c000 0x0 0x2000>;
clocks = <&clk BM1880_CLK_UART_500M>,
@@ -210,7 +210,7 @@
status = "disabled";
};
- uart3: serial@5801E000 {
+ uart3: serial@5801e000 {
compatible = "snps,dw-apb-uart";
reg = <0x0 0x5801e000 0x0 0x2000>;
clocks = <&clk BM1880_CLK_UART_500M>,
--
2.21.1
