Re: [PATCH] dt-bindings: display: convert faraday,tve200 to YAML

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Le Mon, May 17, 2021 at 07:26:24PM -0500, Rob Herring a écrit :
> On Tue, May 11, 2021 at 04:54:48PM +0000, Corentin Labbe wrote:
> > Converts display/faraday,tve200.txt to yaml.
> > 
> > Signed-off-by: Corentin Labbe <clabbe@xxxxxxxxxxxx>
> > ---
> >  .../bindings/display/faraday,tve200.txt       | 54 -----------
> >  .../bindings/display/faraday,tve200.yaml      | 92 +++++++++++++++++++
> >  2 files changed, 92 insertions(+), 54 deletions(-)
> >  delete mode 100644 Documentation/devicetree/bindings/display/faraday,tve200.txt
> >  create mode 100644 Documentation/devicetree/bindings/display/faraday,tve200.yaml
> > 
> > diff --git a/Documentation/devicetree/bindings/display/faraday,tve200.txt b/Documentation/devicetree/bindings/display/faraday,tve200.txt
> > deleted file mode 100644
> > index 82e3bc0b7485..000000000000
> > --- a/Documentation/devicetree/bindings/display/faraday,tve200.txt
> > +++ /dev/null
> > @@ -1,54 +0,0 @@
> > -* Faraday TV Encoder TVE200
> > -
> > -Required properties:
> > -
> > -- compatible: must be one of:
> > -	"faraday,tve200"
> > -	"cortina,gemini-tvc", "faraday,tve200"
> > -
> > -- reg: base address and size of the control registers block
> > -
> > -- interrupts: contains an interrupt specifier for the interrupt
> > -	line from the TVE200
> > -
> > -- clock-names: should contain "PCLK" for the clock line clocking the
> > -	silicon and "TVE" for the 27MHz clock to the video driver
> > -
> > -- clocks: contains phandle and clock specifier pairs for the entries
> > -	in the clock-names property. See
> > -	Documentation/devicetree/bindings/clock/clock-bindings.txt
> > -
> > -Optional properties:
> > -
> > -- resets: contains the reset line phandle for the block
> > -
> > -Required sub-nodes:
> > -
> > -- port: describes LCD panel signals, following the common binding
> > -	for video transmitter interfaces; see
> > -	Documentation/devicetree/bindings/media/video-interfaces.txt
> > -	This port should have the properties:
> > -	reg = <0>;
> > -	It should have one endpoint connected to a remote endpoint where
> > -	the display is connected.
> > -
> > -Example:
> > -
> > -display-controller@6a000000 {
> > -	#address-cells = <1>;
> > -	#size-cells = <0>;
> > -	compatible = "faraday,tve200";
> > -	reg = <0x6a000000 0x1000>;
> > -	interrupts = <13 IRQ_TYPE_EDGE_RISING>;
> > -	resets = <&syscon GEMINI_RESET_TVC>;
> > -	clocks = <&syscon GEMINI_CLK_GATE_TVC>,
> > -		 <&syscon GEMINI_CLK_TVC>;
> > -	clock-names = "PCLK", "TVE";
> > -
> > -	port@0 {
> > -		reg = <0>;
> > -		display_out: endpoint {
> > -			remote-endpoint = <&panel_in>;
> > -		};
> > -	};
> > -};
> > diff --git a/Documentation/devicetree/bindings/display/faraday,tve200.yaml b/Documentation/devicetree/bindings/display/faraday,tve200.yaml
> > new file mode 100644
> > index 000000000000..3ab51e7e72af
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/display/faraday,tve200.yaml
> > @@ -0,0 +1,92 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/display/faraday,tve200.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Faraday TV Encoder TVE200
> > +
> > +maintainers:
> > +  - Linus Walleij <linus.walleij@xxxxxxxxxx>
> > +
> > +properties:
> > +  compatible:
> > +    oneOf:
> > +      - const: faraday,tve200
> > +      - items:
> > +          - const: cortina,gemini-tvc
> > +          - const: faraday,tve200
> > +
> > +  reg:
> > +    minItems: 1
> 
> maxItems: 1
> 
> They evaluate the same, but maxItems seems a bit more logical. 
> 
> > +
> > +  interrupts:
> > +    minItems: 1
> > +
> > +  clock-names:
> > +    items:
> > +      - const: PCLK
> > +      - const: TVE
> > +
> > +  clocks:
> > +    minItems: 2
> > +
> > +  resets:
> > +    minItems: 1
> > +
> > +  "#address-cells":
> > +    const: 1
> > +
> > +  "#size-cells":
> > +    const: 0
> > +
> > +patternProperties:
> > +  "^port@[0-9]+$":
> 
> Should be just 'port' or 'port@0', but really the former is preferred 
> when only 1. 
> 
> Use the graph binding:
> 
> $ref: /schemas/graph.yaml#/properties/port
> 

I have a problem:

I get the following warning:
/usr/src/linux-next/arch/arm/boot/dts/gemini.dtsi:410.31-423.5: Warning (graph_child_address): /soc/display-controller@6a000000: graph node has single child node 'port@0', #address-cells/#size-cells are not necessary
  also defined at /usr/src/linux-next/arch/arm/boot/dts/gemini-dlink-dir-685.dts:492.31-501.5

But if I remove them!
/usr/src/linux-next/arch/arm/boot/dts/gemini-dlink-dir-685.dts:496.5-15: Warning (reg_format): /soc/display-controller@6a000000/port@0:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
arch/arm/boot/dts/gemini-dlink-dir-685.dt.yaml: Warning (pci_device_reg): Failed prerequisite 'reg_format'
arch/arm/boot/dts/gemini-dlink-dir-685.dt.yaml: Warning (pci_device_bus_num): Failed prerequisite 'reg_format'
arch/arm/boot/dts/gemini-dlink-dir-685.dt.yaml: Warning (simple_bus_reg): Failed prerequisite 'reg_format'
arch/arm/boot/dts/gemini-dlink-dir-685.dt.yaml: Warning (i2c_bus_reg): Failed prerequisite 'reg_format'
arch/arm/boot/dts/gemini-dlink-dir-685.dt.yaml: Warning (spi_bus_reg): Failed prerequisite 'reg_format'
/usr/src/linux-next/arch/arm/boot/dts/gemini-dlink-dir-685.dts:495.11-500.6: Warning (avoid_default_addr_size): /soc/display-controller@6a000000/port@0: Relying on default #address-cells value
/usr/src/linux-next/arch/arm/boot/dts/gemini-dlink-dir-685.dts:495.11-500.6: Warning (avoid_default_addr_size): /soc/display-controller@6a000000/port@0: Relying on default #size-cells value
arch/arm/boot/dts/gemini-dlink-dir-685.dt.yaml: Warning (avoid_unnecessary_addr_size): Failed prerequisite 'avoid_default_addr_size'
arch/arm/boot/dts/gemini-dlink-dir-685.dt.yaml: Warning (unique_unit_address): Failed prerequisite 'avoid_default_addr_size'
/usr/src/linux-next/arch/arm/boot/dts/gemini-dlink-dir-685.dts:495.11-500.6: Warning (graph_port): /soc/display-controller@6a000000/port@0: graph node '#address-cells' is -1, must be 1
/usr/src/linux-next/arch/arm/boot/dts/gemini-dlink-dir-685.dts:495.11-500.6: Warning (graph_port): /soc/display-controller@6a000000/port@0: graph node '#size-cells' is -1, must be 0

The only solution is to remove "reg = <0>;" and calling the node "port".
Does it is acceptable ?




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux