On Tue, 18 May 2021 14:57:47 +0200, Oleksij Rempel wrote: > For pressure calculation based on plates resistance we need some additional > properties: > - z1 and z2 channels with additional measurements between plates > - actual resistance of the touchscreen. Currently we use only > X-resistance. > > Signed-off-by: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx> > --- > .../bindings/input/touchscreen/resistive-adc-touch.yaml | 9 +++++++++ > 1 file changed, 9 insertions(+) > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: dtschema/dtc warnings/errors: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/input/touchscreen/resistive-adc-touch.example.dt.yaml: resistive_touch: io-channels: [[4294967295, 1], [4294967295, 2], [4294967295, 3], [4294967295, 4]] is too long From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/input/touchscreen/resistive-adc-touch.yaml /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/input/touchscreen/resistive-adc-touch.example.dt.yaml: resistive_touch: io-channels: Additional items are not allowed ([4294967295, 4] was unexpected) From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/input/touchscreen/resistive-adc-touch.yaml /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/input/touchscreen/resistive-adc-touch.example.dt.yaml: resistive_touch: io-channel-names:2: 'pressure' was expected From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/input/touchscreen/resistive-adc-touch.yaml /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/input/touchscreen/resistive-adc-touch.example.dt.yaml: resistive_touch: io-channel-names: ['x', 'y', 'z1', 'z2'] is too long From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/input/touchscreen/resistive-adc-touch.yaml /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/input/touchscreen/resistive-adc-touch.example.dt.yaml: resistive_touch: io-channel-names: Additional items are not allowed ('z2' was unexpected) From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/input/touchscreen/resistive-adc-touch.yaml See https://patchwork.ozlabs.org/patch/1480237 This check can fail if there are any dependencies. The base for a patch series is generally the most recent rc1. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit.