On Thu, May 13, 2021 at 11:03:40PM +0200, Aleksander Jan Bajkowski wrote: > The xRX300 family has 3 and the xRX330 has 4 gphs. They can also control > some pins of the gpio cascade. This patch documents the missing properties. > > Signed-off-by: Aleksander Jan Bajkowski <olek2@xxxxx> > --- > .../devicetree/bindings/gpio/gpio-stp-xway.yaml | 16 ++++++++++++++++ > 1 file changed, 16 insertions(+) > > diff --git a/Documentation/devicetree/bindings/gpio/gpio-stp-xway.yaml b/Documentation/devicetree/bindings/gpio/gpio-stp-xway.yaml > index a36acc98898c..beb755edf639 100644 > --- a/Documentation/devicetree/bindings/gpio/gpio-stp-xway.yaml > +++ b/Documentation/devicetree/bindings/gpio/gpio-stp-xway.yaml > @@ -84,6 +84,22 @@ properties: > minimum: 0x0 > maximum: 0x7 > > + lantiq,phy3: > + description: > + The gphy3 core can control 3 bits of the gpio cascade. Available on > + the xRX300 and xRX330 family. > + $ref: /schemas/types.yaml#/definitions/uint32 > + minimum: 0x0 > + maximum: 0x7 > + > + lantiq,phy4: You could make these a pattern under patternProperties instead. > + description: > + The gphy4 core can control 3 bits of the gpio cascade. Available on > + the xRX330 family. > + $ref: /schemas/types.yaml#/definitions/uint32 > + minimum: 0x0 > + maximum: 0x7 > + > lantiq,rising: > description: > Use rising instead of falling edge for the shift register. > -- > 2.30.2 >
