This patch adds support for optional vbus regulator. It is managed on phy_power_on/off calls and may be needed for host mode. Signed-off-by: Amelie Delaunay <amelie.delaunay@xxxxxxxxxxx> --- No changes in v2. --- drivers/phy/st/phy-stm32-usbphyc.c | 31 ++++++++++++++++++++++++++++++ 1 file changed, 31 insertions(+) diff --git a/drivers/phy/st/phy-stm32-usbphyc.c b/drivers/phy/st/phy-stm32-usbphyc.c index c184f4e34584..3e491dfb2525 100644 --- a/drivers/phy/st/phy-stm32-usbphyc.c +++ b/drivers/phy/st/phy-stm32-usbphyc.c @@ -57,6 +57,7 @@ struct pll_params { struct stm32_usbphyc_phy { struct phy *phy; struct stm32_usbphyc *usbphyc; + struct regulator *vbus; u32 index; bool active; }; @@ -291,9 +292,31 @@ static int stm32_usbphyc_phy_exit(struct phy *phy) return stm32_usbphyc_pll_disable(usbphyc); } +static int stm32_usbphyc_phy_power_on(struct phy *phy) +{ + struct stm32_usbphyc_phy *usbphyc_phy = phy_get_drvdata(phy); + + if (usbphyc_phy->vbus) + return regulator_enable(usbphyc_phy->vbus); + + return 0; +} + +static int stm32_usbphyc_phy_power_off(struct phy *phy) +{ + struct stm32_usbphyc_phy *usbphyc_phy = phy_get_drvdata(phy); + + if (usbphyc_phy->vbus) + return regulator_disable(usbphyc_phy->vbus); + + return 0; +} + static const struct phy_ops stm32_usbphyc_phy_ops = { .init = stm32_usbphyc_phy_init, .exit = stm32_usbphyc_phy_exit, + .power_on = stm32_usbphyc_phy_power_on, + .power_off = stm32_usbphyc_phy_power_off, .owner = THIS_MODULE, }; @@ -519,6 +542,14 @@ static int stm32_usbphyc_probe(struct platform_device *pdev) usbphyc->phys[port]->index = index; usbphyc->phys[port]->active = false; + usbphyc->phys[port]->vbus = devm_regulator_get_optional(&phy->dev, "vbus"); + if (IS_ERR(usbphyc->phys[port]->vbus)) { + ret = PTR_ERR(usbphyc->phys[port]->vbus); + if (ret == -EPROBE_DEFER) + goto put_child; + usbphyc->phys[port]->vbus = NULL; + } + port++; } -- 2.17.1