On Mon, May 17, 2021 at 12:35:53PM +0200, Stephan Gerhold wrote:
> The fuel gauge in the RT5033 PMIC has its own I2C bus and interrupt
> line. Therefore, it is not actually part of the RT5033 MFD and needs
> its own of_match_table to probe properly.
>
> Also, given that it's independent of the MFD, there is actually
> no need to make the Kconfig depend on MFD_RT5033. Although the driver
> uses the shared <linux/mfd/rt5033.h> header, there is no compile
> or runtime dependency on the RT5033 MFD driver.
>
> Cc: Beomho Seo <beomho.seo@xxxxxxxxxxx>
> Cc: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
> Fixes: b847dd96e659 ("power: rt5033_battery: Add RT5033 Fuel gauge device driver")
> Signed-off-by: Stephan Gerhold <stephan@xxxxxxxxxxx>
> ---
> drivers/power/supply/Kconfig | 3 ++-
> drivers/power/supply/rt5033_battery.c | 7 +++++++
> 2 files changed, 9 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig
> index e696364126f1..20a2f93252f9 100644
> --- a/drivers/power/supply/Kconfig
> +++ b/drivers/power/supply/Kconfig
> @@ -712,7 +712,8 @@ config BATTERY_GOLDFISH
>
> config BATTERY_RT5033
> tristate "RT5033 fuel gauge support"
> - depends on MFD_RT5033
> + depends on I2C
> + select REGMAP_I2C
> help
> This adds support for battery fuel gauge in Richtek RT5033 PMIC.
> The fuelgauge calculates and determines the battery state of charge
> diff --git a/drivers/power/supply/rt5033_battery.c b/drivers/power/supply/rt5033_battery.c
> index f330452341f0..11eb9ad66ea9 100644
> --- a/drivers/power/supply/rt5033_battery.c
> +++ b/drivers/power/supply/rt5033_battery.c
> @@ -164,9 +164,16 @@ static const struct i2c_device_id rt5033_battery_id[] = {
> };
> MODULE_DEVICE_TABLE(i2c, rt5033_battery_id);
>
> +static const struct of_device_id rt5033_battery_of_match[] = {
> + { .compatible = "richtek,rt5033-battery", },
> + { }
> +};
> +MODULE_DEVICE_TABLE(of, rt5033_battery_dt_match);
s/dt_match/of_match
Ugh, I shouldn't do any last-minute renames and then only compile-test
with modules disabled. :(
Sorry, please ignore this one, will send a v2 shortly...
Stephan
