On 15-05-21, 17:52, Jonathan McDowell wrote:
> Now the ADM driver is in mainline add the appropriate definitions for it
> and the NAND controller to get NAND working on IPQ806x platforms,
>
> Signed-off-by: Jonathan McDowell <noodles@xxxxxxxx>
> ---
> arch/arm/boot/dts/qcom-ipq8064.dtsi | 67 +++++++++++++++++++++++++++++
> 1 file changed, 67 insertions(+)
>
> diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi
> index 98995ead4413..aaab3820ab0b 100644
> --- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
> +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
> @@ -185,6 +185,31 @@
> bias-pull-up;
> };
> };
> +
> + nand_pins: nand_pins {
> + mux {
> + pins = "gpio34", "gpio35", "gpio36",
> + "gpio37", "gpio38", "gpio39",
> + "gpio40", "gpio41", "gpio42",
> + "gpio43", "gpio44", "gpio45",
> + "gpio46", "gpio47";
> + function = "nand";
> + drive-strength = <10>;
> + bias-disable;
> + };
> +
> + pullups {
> + pins = "gpio39";
> + bias-pull-up;
> + };
> +
> + hold {
> + pins = "gpio40", "gpio41", "gpio42",
> + "gpio43", "gpio44", "gpio45",
> + "gpio46", "gpio47";
> + bias-bus-hold;
> + };
> + };
> };
>
> intc: interrupt-controller@2000000 {
> @@ -226,6 +251,26 @@
> reg = <0x02098000 0x1000>, <0x02008000 0x1000>;
> };
>
> + adm_dma: dma@18300000 {
dma-controller@...
--
~Vinod
