From: Mark Kettenis <kettenis@xxxxxxxxxxx> This small series adds bindings for the pin and GPIO controller found on the Apple M1 SoC. At this point, the primary consumer for these bindings is U-Boot. With the help of these bindings U-Boot can bring up the PCIe root complex into a state where the OS use it without having to deal with the GPIO pins. A Linux driver may be implemented later to support power management and/or other devices that need GPIO control. Since the binding is based on standard pinmux node bindings this should be relatively easy. Changelog: v2: - Fix typo in DT schema Mark Kettenis (2): dt-bindings: pinctrl: Add DT bindings for apple,pinctrl arm64: apple: Add pinctrl nodes .../bindings/pinctrl/apple,pinctrl.yaml | 103 ++++++++++++++++++ MAINTAINERS | 2 + arch/arm64/boot/dts/apple/t8103.dtsi | 83 ++++++++++++++ include/dt-bindings/pinctrl/apple.h | 13 +++ 4 files changed, 201 insertions(+) create mode 100644 Documentation/devicetree/bindings/pinctrl/apple,pinctrl.yaml create mode 100644 include/dt-bindings/pinctrl/apple.h -- 2.31.1
