On Tue, May 11, 2021 at 04:04:47AM +0200, Ansuel Smith wrote:
> Limit port5 rx delay to qca8337. This is taken from the legacy QSDK code
> that limits the rx delay on port5 to only this particular switch version,
> on other switch only the tx and rx delay for port0 are needed.
>
> Signed-off-by: Ansuel Smith <ansuelsmth@xxxxxxxxx>
This should really be controlled by the phy-mode, but i suspect it is
too late to fix now without breaking some boards.
Reviewed-by: Andrew Lunn <andrew@xxxxxxx>
Andrew
