Re: [PATCH v2 1/7] ARM: dts: sun8i: v3s: add DMA controller to v3s dts

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, 14 May 2021 01:30:18 +0200
Tobias Schramm <t.schramm@xxxxxxxxxxx> wrote:

> The Allwinner V3s and V3 feature a DMA controller.
> This commit adds it to the V3s dtsi.
> 
> Signed-off-by: Tobias Schramm <t.schramm@xxxxxxxxxxx>

Address, interrupt and clocks/reset match the manual.

Reviewed-by: Andre Przywara <andre.przywara@xxxxxxx>

Cheers,
Andre

> ---
>  arch/arm/boot/dts/sun8i-v3s.dtsi | 10 ++++++++++
>  1 file changed, 10 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/sun8i-v3s.dtsi b/arch/arm/boot/dts/sun8i-v3s.dtsi
> index eb4cb63fef13..f0296ab46137 100644
> --- a/arch/arm/boot/dts/sun8i-v3s.dtsi
> +++ b/arch/arm/boot/dts/sun8i-v3s.dtsi
> @@ -1,5 +1,6 @@
>  /*
>   * Copyright (C) 2016 Icenowy Zheng <icenowy@xxxxxxxx>
> + * Copyright (C) 2021 Tobias Schramm <t.schramm@xxxxxxxxxxx>
>   *
>   * This file is dual-licensed: you can use it either under the terms
>   * of the GPL or the X11 license, at your option. Note that this dual
> @@ -172,6 +173,15 @@ nmi_intc: interrupt-controller@1c000d0 {
>  			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
>  		};
>  
> +		dma: dma-controller@1c02000 {
> +			compatible = "allwinner,sun8i-v3s-dma";
> +			reg = <0x01c02000 0x1000>;
> +			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&ccu CLK_BUS_DMA>;
> +			resets = <&ccu RST_BUS_DMA>;
> +			#dma-cells = <1>;
> +		};
> +
>  		tcon0: lcd-controller@1c0c000 {
>  			compatible = "allwinner,sun8i-v3s-tcon";
>  			reg = <0x01c0c000 0x1000>;




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux