Hi Nishanth,
On 13/05/21 1:10 am, Nishanth Menon wrote:
> On 20:31-20210512, Kishon Vijay Abraham I wrote:
>> Enable USB Super-Speed HOST port.
>>
>> Signed-off-by: Kishon Vijay Abraham I <kishon@xxxxxx>
>> Signed-off-by: Aswath Govindraju <a-govindraju@xxxxxx>
>> ---
>> arch/arm64/boot/dts/ti/k3-am642-sk.dts | 39 ++++++++++++++++++++++++++
>> 1 file changed, 39 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/ti/k3-am642-sk.dts b/arch/arm64/boot/dts/ti/k3-am642-sk.dts
>> index 8424cd071955..056c1b2df559 100644
>> --- a/arch/arm64/boot/dts/ti/k3-am642-sk.dts
>> +++ b/arch/arm64/boot/dts/ti/k3-am642-sk.dts
>> @@ -5,6 +5,8 @@
>>
>> /dts-v1/;
>>
>> +#include <dt-bindings/mux/ti-serdes.h>
>> +#include <dt-bindings/phy/phy.h>
>> #include <dt-bindings/gpio/gpio.h>
>> #include <dt-bindings/net/ti-dp83867.h>
>> #include "k3-am642.dtsi"
>> @@ -85,6 +87,12 @@
>> >;
>> };
>>
>> + main_usb0_pins_default: main-usb0-pins-default {
>> + pinctrl-single,pins = <
>> + AM64X_IOPAD(0x02a8, PIN_OUTPUT, 0) /* (E19) USB0_DRVVBUS */
>> + >;
>> + };
>> +
>> main_i2c1_pins_default: main-i2c1-pins-default {
>> pinctrl-single,pins = <
>> AM64X_IOPAD(0x0268, PIN_INPUT_PULLUP, 0) /* (C18) I2C1_SCL */
>> @@ -235,6 +243,37 @@
>> disable-wp;
>> };
>>
>> +&serdes_ln_ctrl {
>> + idle-states = <AM64_SERDES0_LANE0_USB>;
>> +};
>> +
>> +&serdes_wiz0 {
>> + status = "okay";
>
>
> not sure I understand why default of okay needs to be explicitly stated
> as okay in board dts.
hmm, not required. Will remove it.
Thanks
Kishon
