The RZ/G2 boards expect there to be a external clock reference for
USB2 EHCI controllers. For the Beacon boards, this reference clock
is controlled by a programmable verasaclock. Because the RZ/G2
family have a special clock driver when using an external clock,
the third clock reference in the EHCI node needs to point to this
special clock, called usb2_clksel.
Since the usb2_clksel does not keep the usb_extal clock enabled,
the 4th clock entry for the EHCI nodes needs to reference it to
keep the clock running and make USB functional.
Signed-off-by: Adam Ford <aford173@xxxxxxxxx>
diff --git a/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi b/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi
index d8046fedf9c1..e3c8b2fe143e 100644
--- a/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi
+++ b/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi
@@ -271,12 +271,12 @@
&ehci0 {
dr_mode = "otg";
status = "okay";
- clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
+ clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>, <&usb2_clksel>, <&versaclock5 3>;
};
&ehci1 {
status = "okay";
- clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
+ clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>, <&usb2_clksel>, <&versaclock5 3>;
};
&hdmi0 {
--
2.17.1
