On Tue, 11 May 2021 15:48:34 -0500, Doug Zobel wrote: > Add a new device tree object for LP5562 predfined led patterns. > > Signed-off-by: Doug Zobel <dougdev334@xxxxxxxxx> > --- > .../devicetree/bindings/leds/leds-lp55xx.yaml | 103 +++++++++++++++++- > 1 file changed, 102 insertions(+), 1 deletion(-) > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: dtschema/dtc warnings/errors: Documentation/devicetree/bindings/leds/leds-lp55xx.example.dts:159.28-172.20: Warning (unit_address_vs_reg): /example-0/i2c/led-controller@30/pattern@1: node has a unit name, but no reg or ranges property Documentation/devicetree/bindings/leds/leds-lp55xx.example.dts:174.28-209.20: Warning (unit_address_vs_reg): /example-0/i2c/led-controller@30/pattern@2: node has a unit name, but no reg or ranges property Documentation/devicetree/bindings/leds/leds-lp55xx.example.dts:147.24-151.20: Warning (unique_unit_address): /example-0/i2c/led-controller@30/led@1: duplicate unit-address (also used in node /example-0/i2c/led-controller@30/pattern@1) Documentation/devicetree/bindings/leds/leds-lp55xx.example.dts:153.24-157.20: Warning (unique_unit_address): /example-0/i2c/led-controller@30/led@2: duplicate unit-address (also used in node /example-0/i2c/led-controller@30/pattern@2) See https://patchwork.ozlabs.org/patch/1477300 This check can fail if there are any dependencies. The base for a patch series is generally the most recent rc1. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit.
