On Tue, May 11, 2021 at 09:03:37AM +0000, Eugen.Hristev@xxxxxxxxxxxxx wrote: > On 5/11/21 10:37 AM, Alexandre Belloni wrote: > > EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe > > > > On 11/05/2021 07:18:31+0000, Eugen.Hristev@xxxxxxxxxxxxx wrote: > >> On 5/11/21 10:12 AM, Eugen Hristev wrote: > >>> Add Device Tree for sama7g5 SoC and associated board sama7g5-ek > >>> > >>> Signed-off-by: Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx> > >>> [claudiu.beznea@xxxxxxxxxxxxx: add clocks, ethernet, timers, power] > >>> Signed-off-by: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx> > >>> [codrin.ciubotariu@xxxxxxxxxxxxx: add audio] > >>> Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@xxxxxxxxxxxxx> > >>> --- > >> > >> Changes in v2: > >> - fixed license > >> - fixed warnings for make dtbs (changed ahb/apb to just soc) > >> - changed some node names as suggested > >> - removed some okay status properties > >> - addressed cpu node by label > >> - removed stdout path > > > > Why would you remove stdout-path? The solution was to remove The console > > parameter from bootargs, especially since you don't know what name the > > console device will have depending on CONFIG_SERIAL_ATMEL_TTYAT. > > Ok, sure, I will add it back and remove console=... > > I will wait to see if Rob has anymore comments before preparing a v3. No, nothing else.
