Use external clock for all the SERDES used by PCIe controller. This will make the same clock used by the local SERDES as well as the clock provided to the PCIe connector. Signed-off-by: Kishon Vijay Abraham I <kishon@xxxxxx> --- .../dts/ti/k3-j721e-common-proc-board.dts | 40 +++++++++++++++++++ 1 file changed, 40 insertions(+) diff --git a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts index 86f7ab511ee8..1b25a5ae9635 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts +++ b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts @@ -9,6 +9,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> #include <dt-bindings/net/ti-dp83867.h> +#include <dt-bindings/phy/phy-cadence.h> / { chosen { @@ -639,7 +640,40 @@ clock-frequency = <100000000>; }; +&wiz0_pll1_refclk { + assigned-clocks = <&wiz0_pll1_refclk>; + assigned-clock-parents = <&cmn_refclk1>; +}; + +&wiz0_refclk_dig { + assigned-clocks = <&wiz0_refclk_dig>; + assigned-clock-parents = <&cmn_refclk1>; +}; + +&wiz1_pll1_refclk { + assigned-clocks = <&wiz1_pll1_refclk>; + assigned-clock-parents = <&cmn_refclk1>; +}; + +&wiz1_refclk_dig { + assigned-clocks = <&wiz1_refclk_dig>; + assigned-clock-parents = <&cmn_refclk1>; +}; + +&wiz2_pll1_refclk { + assigned-clocks = <&wiz2_pll1_refclk>; + assigned-clock-parents = <&cmn_refclk1>; +}; + +&wiz2_refclk_dig { + assigned-clocks = <&wiz2_refclk_dig>; + assigned-clock-parents = <&cmn_refclk1>; +}; + &serdes0 { + assigned-clocks = <&serdes0 CDNS_SIERRA_PLL_CMNLC>; + assigned-clock-parents = <&wiz0_pll1_refclk>; + serdes0_pcie_link: link@0 { reg = <0>; cdns,num-lanes = <1>; @@ -650,6 +684,9 @@ }; &serdes1 { + assigned-clocks = <&serdes1 CDNS_SIERRA_PLL_CMNLC>; + assigned-clock-parents = <&wiz1_pll1_refclk>; + serdes1_pcie_link: link@0 { reg = <0>; cdns,num-lanes = <2>; @@ -660,6 +697,9 @@ }; &serdes2 { + assigned-clocks = <&serdes2 CDNS_SIERRA_PLL_CMNLC>; + assigned-clock-parents = <&wiz2_pll1_refclk>; + serdes2_pcie_link: link@0 { reg = <0>; cdns,num-lanes = <2>; -- 2.17.1