On Sat, May 08, 2021 at 02:37:41PM +0200, Johan Jonker wrote:
> Current dts files with 'grf' nodes are manually verified.
> In order to automate this process grf.txt has to be
> converted to YAML.
>
> Most compatibility strings are in use with "simple-mfd" added.
>
> Add description already in use:
> "rockchip,rv1108-pmugrf", "syscon"
>
> Add new descriptions for:
> "rockchip,rk3568-grf", "syscon", "simple-mfd"
> "rockchip,rk3568-pmugrf", "syscon", "simple-mfd"
>
> Signed-off-by: Johan Jonker <jbx6244@xxxxxxxxx>
> ---
>
> Changed V3:
> remove select
> change unevaluatedProperties
> add separate schemas for each 'if' subset
Sorry, but by separate I meant different files. But you don't *have* to
do that.
>
> Changed V2:
> add rockchip,rk3328-grf-gpio.yaml
> rename grf-gpio nodename
> ---
> .../devicetree/bindings/soc/rockchip/grf.txt | 61 -----
> .../devicetree/bindings/soc/rockchip/grf.yaml | 262 +++++++++++++++++++++
> 2 files changed, 262 insertions(+), 61 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/soc/rockchip/grf.txt
> create mode 100644 Documentation/devicetree/bindings/soc/rockchip/grf.yaml
>
> diff --git a/Documentation/devicetree/bindings/soc/rockchip/grf.txt b/Documentation/devicetree/bindings/soc/rockchip/grf.txt
> deleted file mode 100644
> index f96511aa3..000000000
> --- a/Documentation/devicetree/bindings/soc/rockchip/grf.txt
> +++ /dev/null
> @@ -1,61 +0,0 @@
> -* Rockchip General Register Files (GRF)
> -
> -The general register file will be used to do static set by software, which
> -is composed of many registers for system control.
> -
> -From RK3368 SoCs, the GRF is divided into two sections,
> -- GRF, used for general non-secure system,
> -- SGRF, used for general secure system,
> -- PMUGRF, used for always on system
> -
> -On RK3328 SoCs, the GRF adds a section for USB2PHYGRF,
> -
> -ON RK3308 SoC, the GRF is divided into four sections:
> -- GRF, used for general non-secure system,
> -- SGRF, used for general secure system,
> -- DETECTGRF, used for audio codec system,
> -- COREGRF, used for pvtm,
> -
> -Required Properties:
> -
> -- compatible: GRF should be one of the following:
> - - "rockchip,px30-grf", "syscon": for px30
> - - "rockchip,rk3036-grf", "syscon": for rk3036
> - - "rockchip,rk3066-grf", "syscon": for rk3066
> - - "rockchip,rk3188-grf", "syscon": for rk3188
> - - "rockchip,rk3228-grf", "syscon": for rk3228
> - - "rockchip,rk3288-grf", "syscon": for rk3288
> - - "rockchip,rk3308-grf", "syscon": for rk3308
> - - "rockchip,rk3328-grf", "syscon": for rk3328
> - - "rockchip,rk3368-grf", "syscon": for rk3368
> - - "rockchip,rk3399-grf", "syscon": for rk3399
> - - "rockchip,rv1108-grf", "syscon": for rv1108
> -- compatible: DETECTGRF should be one of the following:
> - - "rockchip,rk3308-detect-grf", "syscon": for rk3308
> -- compatilbe: COREGRF should be one of the following:
> - - "rockchip,rk3308-core-grf", "syscon": for rk3308
> -- compatible: PMUGRF should be one of the following:
> - - "rockchip,px30-pmugrf", "syscon": for px30
> - - "rockchip,rk3368-pmugrf", "syscon": for rk3368
> - - "rockchip,rk3399-pmugrf", "syscon": for rk3399
> -- compatible: SGRF should be one of the following:
> - - "rockchip,rk3288-sgrf", "syscon": for rk3288
> -- compatible: USB2PHYGRF should be one of the following:
> - - "rockchip,px30-usb2phy-grf", "syscon": for px30
> - - "rockchip,rk3328-usb2phy-grf", "syscon": for rk3328
> -- compatible: USBGRF should be one of the following:
> - - "rockchip,rv1108-usbgrf", "syscon": for rv1108
> -- reg: physical base address of the controller and length of memory mapped
> - region.
> -
> -Example: GRF and PMUGRF of RK3399 SoCs
> -
> - pmugrf: syscon@ff320000 {
> - compatible = "rockchip,rk3399-pmugrf", "syscon";
> - reg = <0x0 0xff320000 0x0 0x1000>;
> - };
> -
> - grf: syscon@ff770000 {
> - compatible = "rockchip,rk3399-grf", "syscon";
> - reg = <0x0 0xff770000 0x0 0x10000>;
> - };
> diff --git a/Documentation/devicetree/bindings/soc/rockchip/grf.yaml b/Documentation/devicetree/bindings/soc/rockchip/grf.yaml
> new file mode 100644
> index 000000000..264e2e5ff
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/soc/rockchip/grf.yaml
> @@ -0,0 +1,262 @@
> +# SPDX-License-Identifier: GPL-2.0
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/soc/rockchip/grf.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Rockchip General Register Files (GRF)
> +
> +maintainers:
> + - Heiko Stuebner <heiko@xxxxxxxxx>
> +
> +properties:
> + compatible:
> + oneOf:
> + - items:
> + - enum:
> + - rockchip,rk3066-grf
> + - rockchip,rk3188-grf
> + - rockchip,rk3288-sgrf
> + - rockchip,rv1108-pmugrf
> + - rockchip,rv1108-usbgrf
> + - const: syscon
> + - items:
> + - enum:
> + - rockchip,px30-grf
> + - rockchip,px30-pmugrf
> + - rockchip,px30-usb2phy-grf
> + - rockchip,rk3036-grf
> + - rockchip,rk3228-grf
> + - rockchip,rk3288-grf
> + - rockchip,rk3308-core-grf
> + - rockchip,rk3308-detect-grf
> + - rockchip,rk3308-grf
> + - rockchip,rk3328-grf
> + - rockchip,rk3328-usb2phy-grf
> + - rockchip,rk3368-grf
> + - rockchip,rk3368-pmugrf
> + - rockchip,rk3399-grf
> + - rockchip,rk3399-pmugrf
> + - rockchip,rk3568-grf
> + - rockchip,rk3568-pmugrf
> + - rockchip,rv1108-grf
> + - const: syscon
> + - const: simple-mfd
> +
> + reg:
> + maxItems: 1
> +
> +required:
> + - compatible
> + - reg
> +
> +unevaluatedProperties: false
> +
> +allOf:
> + - $ref: "#/$defs/px30-grf"
> + - $ref: "#/$defs/rk3288-grf"
> + - $ref: "#/$defs/rk3328-grf"
> + - $ref: "#/$defs/rk3399-grf"
> + - $ref: "#/$defs/reboot"
> + - $ref: "#/$defs/usb2"
> + - $ref: "#/$defs/domains"
> +
> +$defs:
There's not really any point to using '$defs' unless you have 2 or more
references to them.
> + px30-grf:
> + if:
> + properties:
> + compatible:
> + contains:
> + const: rockchip,px30-grf
> +
> + then:
> + properties:
> + lvds:
> + description:
> + Documentation/devicetree/bindings/display/rockchip/rockchip-lvds.txt
> +
> + rk3288-grf:
> + if:
> + properties:
> + compatible:
> + contains:
> + const: rockchip,rk3288-grf
> +
> + then:
> + properties:
> + edp-phy:
> + description:
> + Documentation/devicetree/bindings/phy/rockchip-dp-phy.txt
> +
> + usbphy:
> + description:
> + Documentation/devicetree/bindings/phy/rockchip-usb-phy.txt
> +
> + rk3328-grf:
> + if:
> + properties:
> + compatible:
> + contains:
> + const: rockchip,rk3328-grf
> +
> + then:
> + properties:
> + gpio:
> + type: object
> +
> + $ref: "/schemas/gpio/rockchip,rk3328-grf-gpio.yaml#"
> +
> + unevaluatedProperties: false
> +
> + power-controller:
> + type: object
> +
> + $ref: "/schemas/power/rockchip,power-controller.yaml#"
> +
> + unevaluatedProperties: false
> +
> + rk3399-grf:
> + if:
> + properties:
> + compatible:
> + contains:
> + const: rockchip,rk3399-grf
> +
> + then:
> + properties:
> + mipi-dphy-rx0:
> + type: object
> +
> + $ref: "/schemas/phy/rockchip-mipi-dphy-rx0.yaml#"
> +
> + unevaluatedProperties: false
> +
> + pcie-phy:
> + description:
> + Documentation/devicetree/bindings/phy/rockchip-pcie-phy.txt
> +
> + patternProperties:
> + "phy@[0-9a-f]+$":
> + description:
> + Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt
> +
> + reboot:
> + if:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - rockchip,px30-pmugrf
> + - rockchip,rk3036-grf
> + - rockchip,rk3308-grf
> + - rockchip,rk3368-pmugrf
> +
> + then:
> + properties:
> + reboot-mode:
> + type: object
> +
> + $ref: "/schemas/power/reset/syscon-reboot-mode.yaml#"
> +
> + unevaluatedProperties: false
> +
> + usb2:
> + if:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - rockchip,px30-usb2phy-grf
> + - rockchip,rk3228-grf
> + - rockchip,rk3328-usb2phy-grf
> + - rockchip,rk3399-grf
> + - rockchip,rv1108-grf
> +
> + then:
> + properties:
> + "#address-cells":
> + const: 1
> +
> + "#size-cells":
> + const: 1
> +
> + required:
> + - "#address-cells"
> + - "#size-cells"
> +
> + patternProperties:
> + "usb2-phy@[0-9a-f]+$":
> + type: object
> +
> + $ref: "/schemas/phy/phy-rockchip-inno-usb2.yaml#"
> +
> + unevaluatedProperties: false
> +
> + domains:
> + if:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - rockchip,px30-pmugrf
> + - rockchip,px30-grf
> + - rockchip,rk3228-grf
> + - rockchip,rk3288-grf
> + - rockchip,rk3328-grf
> + - rockchip,rk3368-pmugrf
> + - rockchip,rk3368-grf
> + - rockchip,rk3399-pmugrf
> + - rockchip,rk3399-grf
> +
> + then:
> + properties:
> + io-domains:
> + description:
> + Documentation/devicetree/bindings/power/rockchip-io-domain.txt
> +
> +examples:
> + - |
> + #include <dt-bindings/clock/rk3399-cru.h>
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + #include <dt-bindings/power/rk3399-power.h>
> + grf: syscon@ff770000 {
> + compatible = "rockchip,rk3399-grf", "syscon", "simple-mfd";
> + reg = <0xff770000 0x10000>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + mipi_dphy_rx0: mipi-dphy-rx0 {
> + compatible = "rockchip,rk3399-mipi-dphy-rx0";
> + clocks = <&cru SCLK_MIPIDPHY_REF>,
> + <&cru SCLK_DPHY_RX0_CFG>,
> + <&cru PCLK_VIO_GRF>;
> + clock-names = "dphy-ref", "dphy-cfg", "grf";
> + power-domains = <&power RK3399_PD_VIO>;
> + #phy-cells = <0>;
> + };
> +
> + u2phy0: usb2-phy@e450 {
> + compatible = "rockchip,rk3399-usb2phy";
> + reg = <0xe450 0x10>;
> + clocks = <&cru SCLK_USB2PHY0_REF>;
> + clock-names = "phyclk";
> + #clock-cells = <0>;
> + clock-output-names = "clk_usbphy0_480m";
> + #phy-cells = <0>;
> +
> + u2phy0_host: host-port {
> + #phy-cells = <0>;
> + interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH 0>;
> + interrupt-names = "linestate";
> + };
> +
> + u2phy0_otg: otg-port {
> + #phy-cells = <0>;
> + interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH 0>,
> + <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH 0>,
> + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH 0>;
> + interrupt-names = "otg-bvalid", "otg-id",
> + "linestate";
> + };
> + };
> + };
> --
> 2.11.0
>
