Dne ponedeljek, 10. maj 2021 ob 17:30:44 CEST je Jernej Škrabec napisal(a): > Hi Andre! > > Dne ponedeljek, 10. maj 2021 ob 15:01:19 CEST je Andre Przywara napisal(a): > > The Pine H64 board features an USB 3.0 type A port, which works just > > fine. > > > > Enable the controller and USB PHY in the .dts to make it usable. > > > > Signed-off-by: Andre Przywara <andre.przywara@xxxxxxx> > > --- > > arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts | 9 +++++++++ > > 1 file changed, 9 insertions(+) > > > > diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts b/arch/ > arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts > > index 1ffd68f43f87..9061c9913f4c 100644 > > --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts > > +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts > > @@ -89,6 +89,10 @@ > > status = "okay"; > > }; > > > > +&dwc3 { > > + status = "okay"; > > +}; > > + > > &ehci0 { > > status = "okay"; > > }; > > @@ -332,3 +336,8 @@ > > usb3_vbus-supply = <®_usb_vbus>; > > status = "okay"; > > }; > > + > > +&usb3phy { > > + phy-supply = <®_usb_vbus>; > > + status = "okay"; > > +}; > > -- > > 2.17.5 > > > > Exactly the same patch was already proposed by Icenowy. In short, PHY is > powered by internal power and doesn't need phy-supply property. It's connector > that needs power supply. One of her latest attempts can be found here: > https://lore.kernel.org/patchwork/cover/1058917/ P.S: Maybe wait on outcome of https://lore.kernel.org/linux-sunxi/ 20210430031912.42252-1-samuel@xxxxxxxxxxxx/T/#t which may change USB3 node form. Best regards, Jernej