[PATCH v2 11/17] crypto: qce: core: Make clocks optional

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Thara Gopinath <thara.gopinath@xxxxxxxxxx>

On certain Snapdragon processors, the crypto engine clocks are enabled by
default by security firmware and the driver need not handle the
clocks. Make acquiring of all the clocks optional in crypto enginer driver
so that the driver intializes properly even if no clocks are specified in
the dt.

Cc: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
Cc: Rob Herring <robh+dt@xxxxxxxxxx>
Cc: Andy Gross <agross@xxxxxxxxxx>
Cc: Herbert Xu <herbert@xxxxxxxxxxxxxxxxxxx>
Cc: David S. Miller <davem@xxxxxxxxxxxxx>
Cc: Stephen Boyd <sboyd@xxxxxxxxxx>
Cc: Michael Turquette <mturquette@xxxxxxxxxxxx>
Cc: Vinod Koul <vkoul@xxxxxxxxxx>
Cc: dmaengine@xxxxxxxxxxxxxxx
Cc: linux-clk@xxxxxxxxxxxxxxx
Cc: linux-crypto@xxxxxxxxxxxxxxx
Cc: devicetree@xxxxxxxxxxxxxxx
Cc: linux-kernel@xxxxxxxxxxxxxxx
Cc: bhupesh.linux@xxxxxxxxx
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@xxxxxxxxxx>
[Make clock enablement optional only for qcom parts where
 firmware has already initialized them, using a bool variable]
Signed-off-by: Thara Gopinath <thara.gopinath@xxxxxxxxxx>
---
 drivers/crypto/qce/core.c | 85 +++++++++++++++++++++++----------------
 drivers/crypto/qce/core.h |  2 +
 2 files changed, 53 insertions(+), 34 deletions(-)

diff --git a/drivers/crypto/qce/core.c b/drivers/crypto/qce/core.c
index f6032c303c8c..293d0bfe3aab 100644
--- a/drivers/crypto/qce/core.c
+++ b/drivers/crypto/qce/core.c
@@ -9,6 +9,7 @@
 #include <linux/interrupt.h>
 #include <linux/module.h>
 #include <linux/mod_devicetable.h>
+#include <linux/of_device.h>
 #include <linux/platform_device.h>
 #include <linux/spinlock.h>
 #include <linux/types.h>
@@ -184,12 +185,23 @@ static int qce_check_version(struct qce_device *qce)
 	return 0;
 }
 
+static const struct of_device_id qce_crypto_of_match[] = {
+	{ .compatible = "qcom,ipq6018-qce", },
+	{ .compatible = "qcom,sdm845-qce", },
+	{ .compatible = "qcom,sm8250-qce", },
+	{}
+};
+MODULE_DEVICE_TABLE(of, qce_crypto_of_match);
+
 static int qce_crypto_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	struct qce_device *qce;
+	const struct of_device_id *of_id =
+			of_match_device(qce_crypto_of_match, &pdev->dev);
 	int ret;
 
+
 	qce = devm_kzalloc(dev, sizeof(*qce), GFP_KERNEL);
 	if (!qce)
 		return -ENOMEM;
@@ -209,39 +221,51 @@ static int qce_crypto_probe(struct platform_device *pdev)
 	if (IS_ERR(qce->mem_path))
 		return PTR_ERR(qce->mem_path);
 
-	qce->core = devm_clk_get(qce->dev, "core");
-	if (IS_ERR(qce->core)) {
-		ret = PTR_ERR(qce->core);
-		goto err_mem_path_put;
-	}
-
-	qce->iface = devm_clk_get(qce->dev, "iface");
-	if (IS_ERR(qce->iface)) {
-		ret = PTR_ERR(qce->iface);
-		goto err_mem_path_put;
-	}
-
-	qce->bus = devm_clk_get(qce->dev, "bus");
-	if (IS_ERR(qce->bus)) {
-		ret = PTR_ERR(qce->bus);
-		goto err_mem_path_put;
-	}
-
 	ret = icc_set_bw(qce->mem_path, QCE_DEFAULT_MEM_BANDWIDTH, QCE_DEFAULT_MEM_BANDWIDTH);
 	if (ret)
 		goto err_mem_path_put;
 
-	ret = clk_prepare_enable(qce->core);
-	if (ret)
-		goto err_mem_path_disable;
+	/* On some qcom parts the crypto clocks are already configured by
+	 * the firmware running before linux. In such cases we don't need to
+	 * enable/configure them again. Check here for the same.
+	 */
+	if (!strcmp(of_id->compatible, "qcom,ipq6018-qce") ||
+	    !strcmp(of_id->compatible, "qcom,sdm845-qce"))
+		qce->clks_configured_by_fw = false;
+	else
+		qce->clks_configured_by_fw = true;
+
+	if (!qce->clks_configured_by_fw) {
+		qce->core = devm_clk_get(qce->dev, "core");
+		if (IS_ERR(qce->core)) {
+			ret = PTR_ERR(qce->core);
+			goto err_mem_path_put;
+		}
+
+		qce->iface = devm_clk_get(qce->dev, "iface");
+		if (IS_ERR(qce->iface)) {
+			ret = PTR_ERR(qce->iface);
+			goto err_mem_path_put;
+		}
+
+		qce->bus = devm_clk_get(qce->dev, "bus");
+		if (IS_ERR(qce->bus)) {
+			ret = PTR_ERR(qce->bus);
+			goto err_mem_path_put;
+		}
+
+		ret = clk_prepare_enable(qce->core);
+		if (ret)
+			goto err_mem_path_disable;
 
-	ret = clk_prepare_enable(qce->iface);
-	if (ret)
-		goto err_clks_core;
+		ret = clk_prepare_enable(qce->iface);
+		if (ret)
+			goto err_clks_core;
 
-	ret = clk_prepare_enable(qce->bus);
-	if (ret)
-		goto err_clks_iface;
+		ret = clk_prepare_enable(qce->bus);
+		if (ret)
+			goto err_clks_iface;
+	}
 
 	ret = qce_dma_request(qce->dev, &qce->dma);
 	if (ret)
@@ -293,13 +317,6 @@ static int qce_crypto_remove(struct platform_device *pdev)
 	return 0;
 }
 
-static const struct of_device_id qce_crypto_of_match[] = {
-	{ .compatible = "qcom,ipq6018-qce", },
-	{ .compatible = "qcom,sdm845-qce", },
-	{}
-};
-MODULE_DEVICE_TABLE(of, qce_crypto_of_match);
-
 static struct platform_driver qce_crypto_driver = {
 	.probe = qce_crypto_probe,
 	.remove = qce_crypto_remove,
diff --git a/drivers/crypto/qce/core.h b/drivers/crypto/qce/core.h
index 228fcd69ec51..d9bf05babecc 100644
--- a/drivers/crypto/qce/core.h
+++ b/drivers/crypto/qce/core.h
@@ -23,6 +23,7 @@
  * @dma: pointer to dma data
  * @burst_size: the crypto burst size
  * @pipe_pair_id: which pipe pair id the device using
+ * @clks_configured_by_fw: clocks are already configured by fw
  * @async_req_enqueue: invoked by every algorithm to enqueue a request
  * @async_req_done: invoked by every algorithm to finish its request
  */
@@ -39,6 +40,7 @@ struct qce_device {
 	struct qce_dma_data dma;
 	int burst_size;
 	unsigned int pipe_pair_id;
+	bool clks_configured_by_fw;
 	int (*async_req_enqueue)(struct qce_device *qce,
 				 struct crypto_async_request *req);
 	void (*async_req_done)(struct qce_device *qce, int ret);
-- 
2.30.2




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux