On Tue, May 04, 2021 at 12:38:55PM +0530, Sandeep Maheswaram wrote:
> Add USB nodes for sc7280 IDP board.
>
> Signed-off-by: Sandeep Maheswaram <sanm@xxxxxxxxxxxxxx>
> ---
> arch/arm64/boot/dts/qcom/sc7280-idp.dts | 39 +++++++++++++++++++++++++++++++++
> 1 file changed, 39 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dts b/arch/arm64/boot/dts/qcom/sc7280-idp.dts
> index 54d2cb3..ff48d21 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280-idp.dts
> +++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dts
> @@ -242,6 +242,45 @@
> status = "okay";
> };
>
> +&usb_1 {
> + status = "okay";
> +};
> +
> +&usb_1_dwc3 {
> + dr_mode = "host";
> +};
> +
> +&usb_1_hsphy {
> + status = "okay";
> +
> + vdda-pll-supply = <&vreg_l10c_0p8>;
> + vdda33-supply = <&vreg_l2b_3p0>;
> + vdda18-supply = <&vreg_l1c_1p8>;
> +};
> +
> +&usb_1_qmpphy {
> + status = "okay";
> +
> + vdda-phy-supply = <&vreg_l6b_1p2>;
> + vdda-pll-supply = <&vreg_l1b_0p8>;
> +};
> +
> +&usb_2 {
> + status = "okay";
> +};
> +
> +&usb_2_dwc3 {
> + dr_mode = "peripheral";
> +};
> +
> +&usb_2_hsphy {
> + status = "okay";
> +
> + vdda-pll-supply = <&vreg_l10c_0p8>;
> + vdda33-supply = <&vreg_l2b_3p0>;
> + vdda18-supply = <&vreg_l1c_1p8>;
> +};
> +
> /* PINCTRL - additions to nodes defined in sc7280.dtsi */
>
> &qup_uart5_default {
Reviewed-by: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
