Re: [PATCH 09/16] soc: imx: gpcv2: add support for optional resets

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 29.04.21 09:30, Peng Fan (OSS) wrote:
From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>

Normally the reset for the devices inside the power domain is
triggered automatically from the PGC in the power-up sequencing,
however on i.MX8MM this doesn't work for the GPU power domains.

Add support for triggering the reset explicitly during the power
up sequencing.

Signed-off-by: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
---
  drivers/soc/imx/gpcv2.c | 15 +++++++++++++++
  1 file changed, 15 insertions(+)

diff --git a/drivers/soc/imx/gpcv2.c b/drivers/soc/imx/gpcv2.c
index 640f4165cfba..4a2c2a255d1a 100644
--- a/drivers/soc/imx/gpcv2.c
+++ b/drivers/soc/imx/gpcv2.c
@@ -15,6 +15,7 @@
  #include <linux/pm_runtime.h>
  #include <linux/regmap.h>
  #include <linux/regulator/consumer.h>
+#include <linux/reset.h>
  #include <linux/sizes.h>
  #include <dt-bindings/power/imx7-power.h>
  #include <dt-bindings/power/imx8mq-power.h>
@@ -108,6 +109,7 @@ struct imx_pgc_domain {
  	struct generic_pm_domain genpd;
  	struct regmap *regmap;
  	struct regulator *regulator;
+	struct reset_control *reset;
  	struct clk_bulk_data *clks;
  	int num_clks;
@@ -163,6 +165,8 @@ static int imx_pgc_power_up(struct generic_pm_domain *genpd)
  		goto out_regulator_disable;
  	}
+ reset_control_assert(domain->reset);
+
  	if (domain->bits.pxx) {
  		/* request the domain to power up */
  		regmap_update_bits(domain->regmap, GPC_PU_PGC_SW_PUP_REQ,
@@ -185,6 +189,11 @@ static int imx_pgc_power_up(struct generic_pm_domain *genpd)
  				   GPC_PGC_CTRL_PCR, 0);
  	}
+ /* delay for reset to propagate */
+	udelay(5);
+
+	reset_control_deassert(domain->reset);
+
  	/* request the ADB400 to power up */
  	if (domain->bits.hskreq) {
  		regmap_update_bits(domain->regmap, GPC_PU_PWRHSK,
@@ -531,11 +540,17 @@ static int imx_pgc_domain_probe(struct platform_device *pdev)
  				      domain->voltage, domain->voltage);
  	}
+

Spurious blank line. Otherwise:

Reviewed-by: Frieder Schrempf <frieder.schrempf@xxxxxxxxxx>

  	domain->num_clks = devm_clk_bulk_get_all(domain->dev, &domain->clks);
  	if (domain->num_clks < 0)
  		return dev_err_probe(domain->dev, domain->num_clks,
  				     "Failed to get domain's clocks\n");
+ domain->reset = devm_reset_control_array_get_optional_exclusive(domain->dev);
+	if (IS_ERR(domain->reset))
+		return dev_err_probe(domain->dev, PTR_ERR(domain->reset),
+				     "Failed to get domain's resets\n");
+
  	pm_runtime_enable(domain->dev);
if (domain->bits.map)




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux