Adding compatible string in TSENS dt-bindings, device node for TSENS controller and critical interrupt support, Thermal zone, cooling maps support and changing Hysteresis value for critical trip point, adding cooling-cells property. Changes: 1) Adding sensors according to sensor index rules under thermal-zones. 2) Changing Hysteresis, as it is not needed for critical trip point, when it reaches critical threshold system will go for shutdown. 3) Adding cooling-cells property under cpus node. Dependencies: https://lore.kernel.org/patchwork/project/lkml/list/?series=487403 https://lore.kernel.org/patchwork/patch/1410952/ Rajeshwari (3): dt-bindings: thermal: tsens: Add compatible string to TSENS binding for SC7280 arm64: dts: qcom: SC7280: Add device node support for TSENS arm64: dts: qcom: SC7280: Add thermal zone support .../devicetree/bindings/thermal/qcom-tsens.yaml | 1 + arch/arm64/boot/dts/qcom/sc7280.dtsi | 874 +++++++++++++++++++++ 2 files changed, 875 insertions(+) -- QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
