The RST_BUS_XHCI reset line in the H6 affects both the DWC3 core and the USB3 PHY. This suggests the reset line controls the USB3 IP as a whole. Represent this by attaching the reset line to a glue layer device. Signed-off-by: Samuel Holland <samuel@xxxxxxxxxxxx> --- .../usb/allwinner,sun50i-h6-dwc3.yaml | 75 +++++++++++++++++++ 1 file changed, 75 insertions(+) create mode 100644 Documentation/devicetree/bindings/usb/allwinner,sun50i-h6-dwc3.yaml diff --git a/Documentation/devicetree/bindings/usb/allwinner,sun50i-h6-dwc3.yaml b/Documentation/devicetree/bindings/usb/allwinner,sun50i-h6-dwc3.yaml new file mode 100644 index 000000000000..936b5c74043f --- /dev/null +++ b/Documentation/devicetree/bindings/usb/allwinner,sun50i-h6-dwc3.yaml @@ -0,0 +1,75 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/allwinner,sun50i-h6-dwc3.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner H6 DWC3 USB controller + +maintainers: + - Chen-Yu Tsai <wens@xxxxxxxx> + - Maxime Ripard <mripard@xxxxxxxxxx> + +properties: + compatible: + const: allwinner,sun50i-h6-dwc3 + + "#address-cells": true + + "#size-cells": true + + ranges: true + + resets: + maxItems: 1 + +# Required child node: + +patternProperties: + "^phy@[0-9a-f]+$": + $ref: ../phy/allwinner,sun50i-h6-usb3-phy.yaml# + + "^usb@[0-9a-f]+$": + $ref: snps,dwc3.yaml# + +required: + - compatible + - ranges + - resets + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/sun50i-h6-ccu.h> + #include <dt-bindings/reset/sun50i-h6-ccu.h> + + usb3: usb@5200000 { + compatible = "allwinner,sun50i-h6-dwc3"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + resets = <&ccu RST_BUS_XHCI>; + + dwc3: usb@5200000 { + compatible = "snps,dwc3"; + reg = <0x05200000 0x10000>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_XHCI>, + <&ccu CLK_BUS_XHCI>, + <&rtc 0>; + clock-names = "ref", "bus_early", "suspend"; + dr_mode = "host"; + phys = <&usb3phy>; + phy-names = "usb3-phy"; + }; + + usb3phy: phy@5210000 { + compatible = "allwinner,sun50i-h6-usb3-phy"; + reg = <0x5210000 0x10000>; + clocks = <&ccu CLK_USB_PHY1>; + resets = <&ccu RST_USB_PHY1>; + #phy-cells = <0>; + }; + }; -- 2.26.3
