The pmi8994 has 4 multi-purpose-pins, add these to the definition.
Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
---
Changes since v6:
- Split from the previous patch that adds LPG/PWM nodes
arch/arm64/boot/dts/qcom/pmi8994.dtsi | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/pmi8994.dtsi b/arch/arm64/boot/dts/qcom/pmi8994.dtsi
index b118e87ef59e..b60934ec4a9a 100644
--- a/arch/arm64/boot/dts/qcom/pmi8994.dtsi
+++ b/arch/arm64/boot/dts/qcom/pmi8994.dtsi
@@ -19,6 +19,18 @@ pmi8994_gpios: gpios@c000 {
interrupt-controller;
#interrupt-cells = <2>;
};
+
+ pmi8994_mpps: mpps@a000 {
+ compatible = "qcom,pmi8994-mpp";
+ reg = <0xa000>;
+ gpio-controller;
+ gpio-ranges = <&pmi8994_mpps 0 0 4>;
+ #gpio-cells = <2>;
+ interrupts = <0 0xa0 0 IRQ_TYPE_NONE>,
+ <0 0xa1 0 IRQ_TYPE_NONE>,
+ <0 0xa2 0 IRQ_TYPE_NONE>,
+ <0 0xa3 0 IRQ_TYPE_NONE>;
+ };
};
pmic@3 {
--
2.29.2
