On Wed, 28 Apr 2021 16:50:38 +0300, Nandor Han wrote: > Documents the device tree bindings for `bootcount-nvmem` driver. > > Signed-off-by: Nandor Han <nandor.han@xxxxxxxxxxx> > --- > .../bindings/nvmem/bootcount-nvmem.yaml | 66 +++++++++++++++++++ > 1 file changed, 66 insertions(+) > create mode 100644 Documentation/devicetree/bindings/nvmem/bootcount-nvmem.yaml > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: dtschema/dtc warnings/errors: Documentation/devicetree/bindings/nvmem/bootcount-nvmem.example.dts:27.17-34: Warning (reg_format): /example-0/rtc@68/bootcount_nvmem_regs@e:reg: property has invalid length (8 bytes) (#address-cells == 2, #size-cells == 1) Documentation/devicetree/bindings/nvmem/bootcount-nvmem.example.dts:25.21-29.11: Warning (unit_address_vs_reg): /example-0/rtc@68: node has a unit name, but no reg or ranges property Documentation/devicetree/bindings/nvmem/bootcount-nvmem.example.dt.yaml: Warning (pci_device_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/nvmem/bootcount-nvmem.example.dt.yaml: Warning (pci_device_bus_num): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/nvmem/bootcount-nvmem.example.dt.yaml: Warning (simple_bus_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/nvmem/bootcount-nvmem.example.dt.yaml: Warning (i2c_bus_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/nvmem/bootcount-nvmem.example.dt.yaml: Warning (spi_bus_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/nvmem/bootcount-nvmem.example.dts:26.52-28.15: Warning (avoid_default_addr_size): /example-0/rtc@68/bootcount_nvmem_regs@e: Relying on default #address-cells value Documentation/devicetree/bindings/nvmem/bootcount-nvmem.example.dts:26.52-28.15: Warning (avoid_default_addr_size): /example-0/rtc@68/bootcount_nvmem_regs@e: Relying on default #size-cells value Documentation/devicetree/bindings/nvmem/bootcount-nvmem.example.dt.yaml: Warning (unique_unit_address): Failed prerequisite 'avoid_default_addr_size' See https://patchwork.ozlabs.org/patch/1471179 This check can fail if there are any dependencies. The base for a patch series is generally the most recent rc1. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit.
