Re: [PATCH 1/2] dt-bindings: pwm: add bindings for PWM modules inside QCOM PMICs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 2021-04-27 20:57, Rob Herring wrote:
On Tue, 27 Apr 2021 18:22:09 +0800, Fenglin Wu wrote:
Add bindings for QCOM PMIC PWM modules which are accessed through SPMI
bus.

Signed-off-by: Fenglin Wu <fenglinw@xxxxxxxxxxxxxx>
---
.../devicetree/bindings/pwm/pwm-qcom.yaml | 51 ++++++++++++++++++++++
 1 file changed, 51 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pwm/pwm-qcom.yaml


My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:
./Documentation/devicetree/bindings/pwm/pwm-qcom.yaml:29:6: [warning]
wrong indentation: expected 4 but found 5 (indentation)

dtschema/dtc warnings/errors:
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/pwm/pwm-qcom.yaml:
Additional properties are not allowed ('Properties' was unexpected)
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/pwm/pwm-qcom.yaml:
Additional properties are not allowed ('Properties' was unexpected)
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/pwm/pwm-qcom.yaml:
'anyOf' conditional failed, one must be fixed:
	'properties' is a required property
	'patternProperties' is a required property
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/pwm/pwm-qcom.yaml:
ignoring, error in schema:
warning: no schema found in file:
./Documentation/devicetree/bindings/pwm/pwm-qcom.yaml
Documentation/devicetree/bindings/pwm/pwm-qcom.example.dts:21.13-28:
Warning (reg_format): /example-0/pwms@e800:reg: property has invalid
length (4 bytes) (#address-cells == 1, #size-cells == 1)
Documentation/devicetree/bindings/pwm/pwm-qcom.example.dt.yaml:
Warning (pci_device_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/pwm/pwm-qcom.example.dt.yaml:
Warning (pci_device_bus_num): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/pwm/pwm-qcom.example.dt.yaml:
Warning (simple_bus_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/pwm/pwm-qcom.example.dt.yaml:
Warning (i2c_bus_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/pwm/pwm-qcom.example.dt.yaml:
Warning (spi_bus_reg): Failed prerequisite 'reg_format'
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/pwm/pwm-qcom.example.dt.yaml:
example-0: pwms@e800:reg:0: [59392] is too short
From schema: /usr/local/lib/python3.8/dist-packages/dtschema/schemas/reg.yaml
Documentation/devicetree/bindings/pwm/pwm-qcom.example.dt.yaml:0:0:
/example-0/pwms@e800: failed to match any schema with compatible:
['qcom,pwm']

See https://patchwork.ozlabs.org/patch/1470623

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.

Thanks for the information. It's my 1st time to write binding using yaml format, I hadn't noticed there was a checker can be used for sanity test. I will update and run the dt_binding_check at my side before uploading new patchset.



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux