From: Wesley Cheng <wcheng@xxxxxxxxxxxxxx>
Add the required DTS node for the USB VBUS output regulator, which is
available on PM8150B. This will provide the VBUS source to connected
peripherals.
bod: Add minimum and maximum amperage values for the VBUS current provided
by the pm8150b.
Cc: Rob Herring <robh@xxxxxxxxxx>
Signed-off-by: Wesley Cheng <wcheng@xxxxxxxxxxxxxx>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/pm8150b.dtsi | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/pm8150b.dtsi b/arch/arm64/boot/dts/qcom/pm8150b.dtsi
index b21e56a46145b..2a90d773810ad 100644
--- a/arch/arm64/boot/dts/qcom/pm8150b.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8150b.dtsi
@@ -53,6 +53,14 @@ power-on@800 {
status = "disabled";
};
+ pm8150b_vbus: dcdc@1100 {
+ compatible = "qcom,pm8150b-vbus-reg";
+ regulator-min-microamp = <500000>;
+ regulator-max-microamp = <3000000>;
+ status = "disabled";
+ reg = <0x1100>;
+ };
+
pm8150b_temp: temp-alarm@2400 {
compatible = "qcom,spmi-temp-alarm";
reg = <0x2400>;
--
2.30.1
