Re: [PATCH 1/3] iio: sps30: separate core and interface specific code

[Lars-Peter Clausen <lars@xxxxxxxxxx>]

On 4/25/21 3:55 PM, Tomasz Duszynski wrote:
> Move code responsible for handling i2c communication to a separate file.
> Rationale for this change is preparation for adding support for serial
> communication.
>
> Signed-off-by: Tomasz Duszynski <tomasz.duszynski@xxxxxxxxxxx>

Hi,

The whole series looks really great. Couple of small comments inline.

> [...]
> diff --git a/drivers/iio/chemical/Kconfig b/drivers/iio/chemical/Kconfig
> index 10bb431bc3ce..82af5f62fbc6 100644
> --- a/drivers/iio/chemical/Kconfig
> +++ b/drivers/iio/chemical/Kconfig
> @@ -133,8 +133,6 @@ config SENSIRION_SGP30
>   
>   config SPS30
>   	tristate "SPS30 particulate matter sensor"
> -	depends on I2C
> -	select CRC8
>   	select IIO_BUFFER
>   	select IIO_TRIGGERED_BUFFER
>   	help
> @@ -144,6 +142,17 @@ config SPS30
>   	  To compile this driver as a module, choose M here: the module will
>   	  be called sps30.
>   
> +config SPS30_I2C
> +	tristate "SPS30 particulate matter sensor I2C driver"
> +	depends on SPS30 && I2C
> +	select CRC8
Since the base module is not very useful without any of the drivers 
enabled, what you can do here is, make the base module 
non-user-selectable, e.g. remove the description text after the tristate 
and then do a `select SPS30` both here from he I2C module and the serial 
module.
> +	help
> +	  Say Y here to build support for the Sensirion SPS30 I2C interface
> +	  driver.
> +
> +	  To compile this driver as a module, choose M here: the module will
> +	  be called sps30_i2c.
> +
>   config VZ89X
>   	tristate "SGX Sensortech MiCS VZ89X VOC sensor"
>   	depends on I2C
> diff --git a/drivers/iio/chemical/Makefile b/drivers/iio/chemical/Makefile
> index fef63dd5bf92..41c264a229c0 100644
> --- a/drivers/iio/chemical/Makefile
> +++ b/drivers/iio/chemical/Makefile
> @@ -17,4 +17,5 @@ obj-$(CONFIG_SCD30_I2C) += scd30_i2c.o
>   obj-$(CONFIG_SCD30_SERIAL) += scd30_serial.o
>   obj-$(CONFIG_SENSIRION_SGP30)	+= sgp30.o
>   obj-$(CONFIG_SPS30) += sps30.o
> +obj-$(CONFIG_SPS30_I2C) += sps30_i2c.o
>   obj-$(CONFIG_VZ89X)		+= vz89x.o
> diff --git a/drivers/iio/chemical/sps30.c b/drivers/iio/chemical/sps30.c
> index 7486591588c3..ec9db99e324c 100644
> --- a/drivers/iio/chemical/sps30.c
> +++ b/drivers/iio/chemical/sps30.c
> [...]
> +EXPORT_SYMBOL(sps30_probe);
EXPORT_SYMBOL_GPL()
>   
>   MODULE_AUTHOR("Tomasz Duszynski <tduszyns@xxxxxxxxx>");
>   MODULE_DESCRIPTION("Sensirion SPS30 particulate matter sensor driver");
> diff --git a/drivers/iio/chemical/sps30.h b/drivers/iio/chemical/sps30.h
> new file mode 100644
> index 000000000000..d2b7140fdeb4
> --- /dev/null
> +++ b/drivers/iio/chemical/sps30.h
> @@ -0,0 +1,73 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +#ifndef _SPS30_H
> +#define _SPS30_H
> +
> +struct sps30_state;
> +struct sps30_ops {
> +	int (*start_meas)(struct sps30_state *state);
> +	int (*stop_meas)(struct sps30_state *state);
> +	int (*read_meas)(struct sps30_state *state, int *meas, int num);
> +	int (*reset)(struct sps30_state *state);
> +	int (*clean_fan)(struct sps30_state *state);
> +	int (*read_cleaning_period)(struct sps30_state *state, int *period);
> +	int (*write_cleaning_period)(struct sps30_state *state, int period);

The interface for {read,write}_cleaning_period() should use __be32, 
since that is what is being passed around.

I was a bit confused when reviewing the uart driver why we can just 
memcpy an int into the output buffer without endianess problems.

> +	int (*show_info)(struct sps30_state *state);
> +};
> +
[...]