On 21/04/21 18:37, Guenter Roeck wrote: > On Wed, Apr 21, 2021 at 06:26:20PM +0200, Francesco Zanella wrote: >> Documentation for new device tree property "start-at-boot". >> >> Signed-off-by: Francesco Zanella <francesco.zanella@xxxxxxxxx> >> --- >> Documentation/devicetree/bindings/watchdog/gpio-wdt.txt | 7 +++++++ >> 1 file changed, 7 insertions(+) >> >> diff --git a/Documentation/devicetree/bindings/watchdog/gpio-wdt.txt b/Documentation/devicetree/bindings/watchdog/gpio-wdt.txt >> index 198794963786..cdaf7f0602e8 100644 >> --- a/Documentation/devicetree/bindings/watchdog/gpio-wdt.txt >> +++ b/Documentation/devicetree/bindings/watchdog/gpio-wdt.txt >> @@ -17,6 +17,13 @@ Optional Properties: >> - always-running: If the watchdog timer cannot be disabled, add this flag to >> have the driver keep toggling the signal without a client. It will only cease >> to toggle the signal when the device is open and the timeout elapsed. >> +- start-at-boot: Start pinging hw watchdog at probe, in order to take advantage >> + of kernel configs: >> + - WATCHDOG_HANDLE_BOOT_ENABLED: Avoid possible reboot if hw watchdog was been >> + enabled before the kernel (by uboot for example) and userspace doesn't take >> + control of /dev/watchdog in time; >> + - WATCHDOG_OPEN_TIMEOUT: Reboot if userspace doesn't take control of >> + /dev/watchdog within the timeout. > > You are not supposed to refer to Linux kernel details in devicetree > bindings documents. > > Guenter > >> >> Example: >> watchdog: watchdog { >> -- >> 2.17.1 >> OK, I'm sorry. I will resend the patch series without kernel configs references in documents. Francesco