LAN937x is a Multi-Port 100BASE-T1 Ethernet Physical Layer switch compliant with the IEEE 802.3bw-2015 specification. The device provides 100 Mbit/s transmit and receive capability over a single Unshielded Twisted Pair (UTP) cable. LAN937x is successive revision of KSZ series switch. This series of patches provide the DSA driver support for Microchip LAN937X switch and it configures through SPI interface. This driver shares some of the functions from KSZ common layer. The LAN937x switch series family consists of following SKUs: LAN9370: - 4 T1 Phys - 1 RGMII port LAN9371: - 3 T1 Phys & 1 TX Phy - 2 RGMII ports LAN9372: - 5 T1 Phys & 1 TX Phy - 2 RGMII ports LAN9373: - 5 T1 Phys - 2 RGMII & 1 SGMII port LAN9374: - 6 T1 Phys - 2 RGMII ports More support will be added at a later stage. Changes in v2: - return check for register read/writes - dt compatible compatible check is added against chip id value - lan937x_internal_t1_tx_phy_write() is renamed to lan937x_internal_phy_write() - lan937x_is_internal_tx_phy_port is renamed to lan937x_is_internal_100BTX_phy_port as it is 100Base-Tx phy - Return value for lan937x_internal_phy_write() is -EOPNOTSUPP in case of failures - Return value for lan937x_internal_phy_read() is 0xffff for non existent phy - cpu_port checking is removed from lan937x_port_stp_state_set() - lan937x_phy_link_validate: 100baseT_Full to 100baseT1_Full - T1 Phy driver is moved to drivers/net/phy/microchip_t1.c - Tx phy driver support will be added later - Legacy switch checkings in dts file are removed. - tag_ksz.c: Re-used ksz9477_rcv for lan937x_rcv - tag_ksz.c: Xmit() & rcv() Comments are corrected w.r.to host - net/dsa/Kconfig: Family skew numbers altered in ascending order - microchip,lan937x.yaml: eth is replaced with ethernet - microchip,lan937x.yaml: spi1 is replaced with spi - microchip,lan937x.yaml: cpu labelling is removed - microchip,lan937x.yaml: port@x value will match the reg value now Prasanna Vengateshan (9): dt-bindings: net: dsa: dt bindings for microchip lan937x net: phy: Add support for LAN937x T1 phy driver net: dsa: tag_ksz: add tag handling for Microchip LAN937x net: dsa: microchip: add DSA support for microchip lan937x net: dsa: microchip: add support for phylink management net: dsa: microchip: add support for ethtool port counters net: dsa: microchip: add support for port mirror operations net: dsa: microchip: add support for fdb and mdb management net: dsa: microchip: add support for vlan operations .../bindings/net/dsa/microchip,lan937x.yaml | 142 ++ MAINTAINERS | 1 + drivers/net/dsa/microchip/Kconfig | 12 + drivers/net/dsa/microchip/Makefile | 5 + drivers/net/dsa/microchip/ksz_common.h | 5 + drivers/net/dsa/microchip/lan937x_dev.c | 674 +++++++++ drivers/net/dsa/microchip/lan937x_dev.h | 68 + drivers/net/dsa/microchip/lan937x_main.c | 1204 +++++++++++++++++ drivers/net/dsa/microchip/lan937x_reg.h | 710 ++++++++++ drivers/net/dsa/microchip/lan937x_spi.c | 226 ++++ drivers/net/phy/microchip_t1.c | 361 ++++- include/net/dsa.h | 2 + net/dsa/Kconfig | 4 +- net/dsa/tag_ksz.c | 58 + 14 files changed, 3409 insertions(+), 63 deletions(-) create mode 100644 Documentation/devicetree/bindings/net/dsa/microchip,lan937x.yaml create mode 100644 drivers/net/dsa/microchip/lan937x_dev.c create mode 100644 drivers/net/dsa/microchip/lan937x_dev.h create mode 100644 drivers/net/dsa/microchip/lan937x_main.c create mode 100644 drivers/net/dsa/microchip/lan937x_reg.h create mode 100644 drivers/net/dsa/microchip/lan937x_spi.c -- 2.27.0
