[PATCH 0/2] Allwinner H6 USB3 device tree updates

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



While implementing support for this USB controller in U-Boot, I noticed
that the reset line alsp affects they PHY. It looks like most platforms
use a separate glue node to represent this, and in fact there is already
a compatible for the H6 listed in drivers/usb/dwc3/dwc3-of-simple.c.

Since this layout matches the usual way of modeling this hardware, it
allows using the existing drivers without adding platform-specific code.

Samuel Holland (2):
  dt-bindings: usb: Document the Allwinner H6 DWC3 glue
  arm64: dts: allwinner: h6: Wrap DWC3 and PHY in glue layer

 .../usb/allwinner,sun50i-h6-dwc3.yaml         | 75 +++++++++++++++++++
 .../dts/allwinner/sun50i-h6-beelink-gs1.dts   |  6 +-
 .../dts/allwinner/sun50i-h6-orangepi-3.dts    |  6 +-
 .../boot/dts/allwinner/sun50i-h6-pine-h64.dts |  9 +--
 .../dts/allwinner/sun50i-h6-tanix-tx6.dts     |  6 +-
 arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi  | 60 ++++++++-------
 6 files changed, 115 insertions(+), 47 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/usb/allwinner,sun50i-h6-dwc3.yaml

-- 
2.26.3




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux