Take a pass at cleaning up a bunch of warnings from 'make dtbs_check' that have crept in. Signed-off-by: Kevin Hilman <khilman@xxxxxxxxxxxx> --- .../devicetree/bindings/gpu/arm,mali-bifrost.yaml | 5 +++++ .../bindings/media/amlogic,axg-ge2d.yaml | 1 + Documentation/devicetree/bindings/media/rc.yaml | 4 ++++ .../devicetree/bindings/sound/amlogic,t9015.yaml | 1 + arch/arm64/boot/dts/amlogic/meson-a1.dtsi | 4 ++-- arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi | 14 +++++++------- .../arm64/boot/dts/amlogic/meson-g12b-gsking-x.dts | 2 +- .../boot/dts/amlogic/meson-g12b-gtking-pro.dts | 4 ++-- arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dts | 2 +- .../boot/dts/amlogic/meson-g12b-odroid-n2.dtsi | 4 ++-- .../arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts | 2 +- .../dts/amlogic/meson-gxl-s905d-mecool-kii-pro.dts | 2 +- .../boot/dts/amlogic/meson-gxl-s905d-sml5442tw.dts | 8 ++++---- .../boot/dts/amlogic/meson-gxm-mecool-kiii-pro.dts | 2 +- .../boot/dts/amlogic/meson-gxm-minix-neo-u9h.dts | 2 +- .../boot/dts/amlogic/meson-gxm-wetek-core2.dts | 2 +- arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi | 4 ++-- .../arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts | 2 +- 18 files changed, 38 insertions(+), 27 deletions(-) diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml index 184492162e7e..db2240bad012 100644 --- a/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml +++ b/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml @@ -69,6 +69,11 @@ properties: where voltage is in V, frequency is in MHz. + dma-coherent: + description: | + Present if page table walks made by the SMMU are cache coherent with the + CPU. + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/media/amlogic,axg-ge2d.yaml b/Documentation/devicetree/bindings/media/amlogic,axg-ge2d.yaml index bee93bd84771..f3a337954eb3 100644 --- a/Documentation/devicetree/bindings/media/amlogic,axg-ge2d.yaml +++ b/Documentation/devicetree/bindings/media/amlogic,axg-ge2d.yaml @@ -33,6 +33,7 @@ required: - interrupts - clocks - resets + - reset-names additionalProperties: false diff --git a/Documentation/devicetree/bindings/media/rc.yaml b/Documentation/devicetree/bindings/media/rc.yaml index 946441b4e1a5..c4a088669112 100644 --- a/Documentation/devicetree/bindings/media/rc.yaml +++ b/Documentation/devicetree/bindings/media/rc.yaml @@ -90,9 +90,12 @@ properties: - rc-leadtek-y04g0051 - rc-lme2510 - rc-manli + - rc-mecool-kii-pro + - rc-mecool-kiii-pro - rc-medion-x10 - rc-medion-x10-digitainer - rc-medion-x10-or2x + - rc-minix-neo - rc-msi-digivox-ii - rc-msi-digivox-iii - rc-msi-tvanywhere @@ -145,6 +148,7 @@ properties: - rc-videomate-s350 - rc-videomate-tv-pvr - rc-videostrong-kii-pro + - rc-vega-s9x - rc-wetek-hub - rc-wetek-play2 - rc-winfast diff --git a/Documentation/devicetree/bindings/sound/amlogic,t9015.yaml b/Documentation/devicetree/bindings/sound/amlogic,t9015.yaml index c7613ea728d4..7bcbed603824 100644 --- a/Documentation/devicetree/bindings/sound/amlogic,t9015.yaml +++ b/Documentation/devicetree/bindings/sound/amlogic,t9015.yaml @@ -41,6 +41,7 @@ required: - clocks - clock-names - resets + - reset-names additionalProperties: false diff --git a/arch/arm64/boot/dts/amlogic/meson-a1.dtsi b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi index 755b4ad15184..b4000cf65a9a 100644 --- a/arch/arm64/boot/dts/amlogic/meson-a1.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi @@ -88,13 +88,13 @@ reset: reset-controller@0 { #reset-cells = <1>; }; - periphs_pinctrl: pinctrl@0400 { + periphs_pinctrl: pinctrl@400 { compatible = "amlogic,meson-a1-periphs-pinctrl"; #address-cells = <2>; #size-cells = <2>; ranges; - gpio: bank@0400 { + gpio: bank@400 { reg = <0x0 0x0400 0x0 0x003c>, <0x0 0x0480 0x0 0x0118>; reg-names = "mux", "gpio"; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi index 3dd2a5a8739b..793d48f72390 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi @@ -128,9 +128,9 @@ soc { pcie: pcie@fc000000 { compatible = "amlogic,g12a-pcie", "snps,dw-pcie"; - reg = <0x0 0xfc000000 0x0 0x400000 - 0x0 0xff648000 0x0 0x2000 - 0x0 0xfc400000 0x0 0x200000>; + reg = <0x0 0xfc000000 0x0 0x400000>, + <0x0 0xff648000 0x0 0x2000>, + <0x0 0xfc400000 0x0 0x200000>; reg-names = "elbi", "cfg", "config"; interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; #interrupt-cells = <1>; @@ -140,8 +140,8 @@ pcie: pcie@fc000000 { #address-cells = <3>; #size-cells = <2>; device_type = "pci"; - ranges = <0x81000000 0 0 0x0 0xfc600000 0 0x00100000 - 0x82000000 0 0xfc700000 0x0 0xfc700000 0 0x1900000>; + ranges = <0x81000000 0 0 0x0 0xfc600000 0 0x00100000>, + <0x82000000 0 0xfc700000 0x0 0xfc700000 0 0x1900000>; clocks = <&clkc CLKID_PCIE_PHY &clkc CLKID_PCIE_COMB @@ -2009,7 +2009,7 @@ mux { }; }; - vrtc: rtc@0a8 { + vrtc: rtc@a8 { compatible = "amlogic,meson-vrtc"; reg = <0x0 0x000a8 0x0 0x4>; }; @@ -2187,7 +2187,7 @@ gpio_intc: interrupt-controller@f080 { amlogic,channel-interrupts = <64 65 66 67 68 69 70 71>; }; - watchdog: wdt@f0d0 { + watchdog: watchdog@f0d0 { compatible = "amlogic,meson-gxbb-wdt"; reg = <0x0 0xf0d0 0x0 0x10>; clocks = <&xtal>; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-gsking-x.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-gsking-x.dts index 211191f66344..6c7bfacbad78 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-gsking-x.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-gsking-x.dts @@ -12,7 +12,7 @@ #include <dt-bindings/sound/meson-g12a-tohdmitx.h> / { - compatible = "azw,gsking-x", "amlogic,g12b"; + compatible = "azw,gsking-x", "amlogic,s922x", "amlogic,g12b"; model = "Beelink GS-King X"; aliases { diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-gtking-pro.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-gtking-pro.dts index 0e331aa5a2d7..707daf92787b 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-gtking-pro.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-gtking-pro.dts @@ -11,7 +11,7 @@ #include <dt-bindings/sound/meson-g12a-tohdmitx.h> / { - compatible = "azw,gtking", "amlogic,g12b"; + compatible = "azw,gtking", "amlogic,s922x", "amlogic,g12b"; model = "Beelink GT-King Pro"; aliases { @@ -35,7 +35,7 @@ power-button { leds { compatible = "gpio-leds"; - white { + led-white { label = "power:white"; gpios = <&gpio_ao GPIOAO_11 GPIO_ACTIVE_HIGH>; default-state = "on"; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dts index a7db84a500bb..5d96c1449050 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dts @@ -11,7 +11,7 @@ #include <dt-bindings/sound/meson-g12a-tohdmitx.h> / { - compatible = "azw,gtking", "amlogic,g12b"; + compatible = "azw,gtking", "amlogic,s922x", "amlogic,g12b"; model = "Beelink GT-King"; aliases { diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi index 473b81c652cf..344573e157a7 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi @@ -42,7 +42,7 @@ emmc_pwrseq: emmc-pwrseq { leds { compatible = "gpio-leds"; - blue { + led-blue { label = "n2:blue"; gpios = <&gpio_ao GPIOAO_11 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; @@ -497,7 +497,7 @@ &gpio { * This signal should be handled by a USB specific power sequence * in order to reset the Hub when USB bus is powered down. */ - usb-hub { + hog-0 { gpio-hog; gpios = <GPIOH_4 GPIO_ACTIVE_HIGH>; output-high; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts index bfaf7f41a2d6..201596247fd9 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts @@ -257,7 +257,7 @@ &gpio_ao { * This signal should be handled by a USB specific power sequence * in order to reset the Hub when USB bus is powered down. */ - usb-hub { + hog-0 { gpio-hog; gpios = <GPIOAO_4 GPIO_ACTIVE_HIGH>; output-high; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-mecool-kii-pro.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-mecool-kii-pro.dts index 5ab5d3aa0646..c529b6c860a4 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-mecool-kii-pro.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-mecool-kii-pro.dts @@ -44,7 +44,7 @@ button@0 { leds { compatible = "gpio-leds"; - blue { + led-blue { color = <LED_COLOR_ID_BLUE>; function = LED_FUNCTION_POWER; gpios = <&gpio GPIODV_24 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-sml5442tw.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-sml5442tw.dts index ad6d72254150..b331a013572f 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-sml5442tw.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-sml5442tw.dts @@ -16,28 +16,28 @@ / { leds { compatible = "gpio-leds"; - yellow { + led-yellow { color = <LED_COLOR_ID_YELLOW>; function = LED_FUNCTION_STATUS; gpios = <&gpio_ao GPIOAO_6 GPIO_ACTIVE_HIGH>; default-state = "off"; }; - blue { + led-blue { color = <LED_COLOR_ID_BLUE>; function = LED_FUNCTION_STATUS; gpios = <&gpio GPIODV_28 GPIO_ACTIVE_HIGH>; default-state = "off"; }; - green { + led-green { color = <LED_COLOR_ID_GREEN>; function = LED_FUNCTION_STATUS; gpios = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_HIGH>; default-state = "on"; }; - red { + led-red { color = <LED_COLOR_ID_RED>; function = LED_FUNCTION_STATUS; gpios = <&gpio GPIODV_27 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-mecool-kiii-pro.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-mecool-kiii-pro.dts index 0651756d7fb5..ebebf344b715 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm-mecool-kiii-pro.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-mecool-kiii-pro.dts @@ -49,7 +49,7 @@ button@0 { leds { compatible = "gpio-leds"; - blue { + led-blue { color = <LED_COLOR_ID_BLUE>; function = LED_FUNCTION_POWER; gpios = <&gpio GPIODV_24 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-minix-neo-u9h.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-minix-neo-u9h.dts index a414cd39c2b1..ea9f234d1fc7 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm-minix-neo-u9h.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-minix-neo-u9h.dts @@ -17,7 +17,7 @@ / { leds { compatible = "gpio-leds"; - white { + led-white { color = <LED_COLOR_ID_WHITE>; function = LED_FUNCTION_POWER; gpios = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-wetek-core2.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-wetek-core2.dts index ec794c134c15..1e7f77f9b533 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm-wetek-core2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-wetek-core2.dts @@ -22,7 +22,7 @@ memory@0 { leds { compatible = "gpio-leds"; - blue { + led-blue { color = <LED_COLOR_ID_BLUE>; function = LED_FUNCTION_STATUS; gpios = <&gpio GPIODV_24 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi index 877e3b989203..66d67524b031 100644 --- a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi @@ -43,14 +43,14 @@ button-function { leds { compatible = "gpio-leds"; - white { + led-white { color = <LED_COLOR_ID_WHITE>; function = LED_FUNCTION_STATUS; gpios = <&gpio_ao GPIOAO_4 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; }; - red { + led-red { color = <LED_COLOR_ID_RED>; function = LED_FUNCTION_STATUS; gpios = <&gpio_expander 5 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts index b2a4e823c1d8..8c327c03d845 100644 --- a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts @@ -47,7 +47,7 @@ &gpio { * This signal should be handled by a USB specific power sequence * in order to reset the Hub when USB bus is powered down. */ - usb-hub { + hog-0 { gpio-hog; gpios = <GPIOH_4 GPIO_ACTIVE_HIGH>; output-high; -- 2.29.2