Re: [PATCH V2] arm64: dts: qcom: sc7280: Add nodes for eMMC and SD card

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 2021-04-15 01:55, Doug Anderson wrote:
Hi,

On Tue, Apr 13, 2021 at 3:59 AM <sbhanu@xxxxxxxxxxxxxx> wrote:

>> >>> +                                       required-opps =
>> >>> <&rpmhpd_opp_low_svs>;
>> >>> +                                       opp-peak-kBps = <1200000
>> >>> 76000>;
>> >>> +                                       opp-avg-kBps = <1200000
>> >>> 50000>;
>> >> Why are the kBps numbers so vastly different than the ones on sc7180
>> >> for the same OPP point. That implies:
>> >>
>> >> a) sc7180 is wrong.
>> >>
>> >> b) This patch is wrong.
>> >>
>> >> c) The numbers are essentially random and don't really matter.
>> >>
>> >> Can you identify which of a), b), or c) is correct, or propose an
>> >> alternate explanation of the difference?
>> >>
>>
>> We calculated bus votes values for both sc7180 and sc7280 with ICB
>> tool,
>> above mentioned values we got for sc7280.
>
> I don't know what an ICB tool is. Please clarify.
>
> Also: just because a tool spits out numbers that doesn't mean it's
> correct. Presumably the tool could be wrong or incorrectly configured.
> We need to understand why these numbers are different.
>
we checked with ICB tool team on this they conformed as Rennell & Kodiak
are different chipsets,
we might see delta in ib/ab values due to delta in scaling factors.

...but these numbers are in kbps, aren't they? As I understand it
these aren't supposed to be random numbers spit out by a tool but are
supposed to be understandable by how much bandwidth an IP block (like
MMC) needs from the busses it's connected to. Since the MMC IP block
on sc7180 and sc7280 is roughly the same there shouldn't be a big
difference in numbers.

Something smells wrong.

Adding a few people who understand interconnects better than I do, though.


ICB team has re-checked the Rennell ICB tool and they confirmed that some configs were wrong in Rennell ICB tool and they corrected it.With the new updated Rennell ICB tool below are the values :


Rennell LC:(Sc7180)

opp-384000000 {
             opp-hz = /bits/ 64 <384000000>;
             required-opps = <&rpmhpd_opp_nom>;
             opp-peak-kBps = <5400000 490000>;
             opp-avg-kBps = <6600000 300000>;
};


And now, these values are near to Kodaik LC values:

Kodaik LC:(SC7280)

opp-384000000 {
           opp-hz = /bits/ 64 <384000000>;
           required-opps = <&rpmhpd_opp_nom>;
           opp-peak-kBps = <5400000 399000>;
           opp-avg-kBps = <6000000 300000>;
};


-Doug



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux