Maxime Ripard <maxime@xxxxxxxxxx> 于2021年4月15日周四 下午4:42写道： > > On Fri, Apr 09, 2021 at 08:23:19AM +0800, Kevin Tang wrote: > > Maxime Ripard <maxime@xxxxxxxxxx> 于2021年4月7日周三 下午6:46写道： > > > > > On Wed, Mar 31, 2021 at 09:49:14AM +0800, Kevin Tang wrote: > > > > Hi Maxime, > > > > > > > > Maxime Ripard <maxime@xxxxxxxxxx> 于2021年3月24日周三 下午7:13写道： > > > > > > > > > On Mon, Feb 22, 2021 at 09:28:21PM +0800, Kevin Tang wrote: > > > > > > From: Kevin Tang <kevin.tang@xxxxxxxxxx> > > > > > > > > > > > > Adds MIPI DSI Controller > > > > > > support for Unisoc's display subsystem. > > > > > > > > > > > > Cc: Orson Zhai <orsonzhai@xxxxxxxxx> > > > > > > Cc: Chunyan Zhang <zhang.lyra@xxxxxxxxx> > > > > > > Signed-off-by: Kevin Tang <kevin.tang@xxxxxxxxxx> > > > > > > Reviewed-by: Rob Herring <robh@xxxxxxxxxx> > > > > > > --- > > > > > > .../display/sprd/sprd,sharkl3-dsi-host.yaml | 102 > > > ++++++++++++++++++ > > > > > > 1 file changed, 102 insertions(+) > > > > > > create mode 100644 > > > > > > > > Documentation/devicetree/bindings/display/sprd/sprd,sharkl3-dsi-host.yaml > > > > > > > > > > > > diff --git > > > > > > > > a/Documentation/devicetree/bindings/display/sprd/sprd,sharkl3-dsi-host.yaml > > > > > > > > b/Documentation/devicetree/bindings/display/sprd/sprd,sharkl3-dsi-host.yaml > > > > > > new file mode 100644 > > > > > > index 000000000..d439f688f > > > > > > --- /dev/null > > > > > > +++ > > > > > > > > b/Documentation/devicetree/bindings/display/sprd/sprd,sharkl3-dsi-host.yaml > > > > > > @@ -0,0 +1,102 @@ > > > > > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > > > > > > +%YAML 1.2 > > > > > > +--- > > > > > > +$id: > > > > > http://devicetree.org/schemas/display/sprd/sprd,sharkl3-dsi-host.yaml# > > > > > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > > > > > + > > > > > > +title: Unisoc MIPI DSI Controller > > > > > > + > > > > > > +maintainers: > > > > > > + - Kevin Tang <kevin.tang@xxxxxxxxxx> > > > > > > + > > > > > > +properties: > > > > > > + compatible: > > > > > > + const: sprd,sharkl3-dsi-host > > > > > > + > > > > > > + reg: > > > > > > + maxItems: 1 > > > > > > + > > > > > > + interrupts: > > > > > > + maxItems: 2 > > > > > > + > > > > > > + clocks: > > > > > > + minItems: 1 > > > > > > + > > > > > > + clock-names: > > > > > > + items: > > > > > > + - const: clk_src_96m > > > > > > + > > > > > > + power-domains: > > > > > > + maxItems: 1 > > > > > > + > > > > > > + ports: > > > > > > + type: object > > > > > > + > > > > > > + properties: > > > > > > + "#address-cells": > > > > > > + const: 1 > > > > > > + > > > > > > + "#size-cells": > > > > > > + const: 0 > > > > > > + > > > > > > + port@0: > > > > > > + type: object > > > > > > + description: > > > > > > + A port node with endpoint definitions as defined in > > > > > > + > > > Documentation/devicetree/bindings/media/video-interfaces.txt. > > > > > > + That port should be the input endpoint, usually coming > > > from > > > > > > + the associated DPU. > > > > > > + port@1: > > > > > > + type: object > > > > > > + description: > > > > > > + A port node with endpoint definitions as defined in > > > > > > + > > > Documentation/devicetree/bindings/media/video-interfaces.txt. > > > > > > + That port should be the output endpoint, usually output to > > > > > > + the associated panel. > > > > > > > > > > The DSI generic binding asks that peripherals that are controlled > > > > > through a DCS be a subnode of the MIPI-DSI bus, not through a port > > > > > endpoint. > > > > > > > > > Our DSI controller don't support DCS now... > > > > > > I'm not sure I follow you, you mentionned in the patch 4 that you were > > > testing for a device to be in command mode, how would that work without > > > DCS support? > > > > > Sorry, I see DCS as DSC, pls ignore my previous comments. > > > > dsi input node is display controller and dsi output node is panel, > > I still don't understand what it has to do with dcs? and it seems that > > other vendors also like this. > > > > can you help provide some cases? > > So the device tree is a tree organized through which bus controls which > device: Your DSI controller is accessed through a memory-mapped region > and is thus a child node of the main bus (I guess?) and then, since the > DSI panel is going to be controlled through the DSI controller and > MIPI-DCS, it needs to be a child of the display controller. Yeah, access DSI controller registers is through AHB bus. I'm a little confused, DSI panel node should be a child of the display controller? I found a lot of cases are organized like this, we also do like it. https://elixir.bootlin.com/linux/v5.11.15/source/arch/arm/boot/dts/tegra114-dalmore.dts#L48 > > This is exactly what is being described here: > https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/devicetree/bindings/display/mipi-dsi-bus.txt#n42 > > The second port is thus not needed at all Yeah, dsi_out port is no need, should be detele. Besides, I also have a question, if out dsi-phy is separate driver(eg, dphy have it's own bus) dsi_out port should be "dphy_in"? > > Maxime
